1 / 2

Vit dagføra vøruupplýsingarnar. Vit fara ígjøgnum allar vørulýsingarnar í vørusavninum. Upplýsingarnar um nýtsluøki og tilfar, sum vøran kann brúkast til, kunnu vera skeivar, meðan vit skráseta rætta tilfarið fyri hvørja vøru. Ert tú í iva, spyr tín kontaktpersón hjá A4.

Application area

Tilfar

Múrur og múrsteinar

The window sealing tape is especially suitable for the inner sealing of the window connection joint between the window frame and masonry.

Vørulýsing

Full-surface, adhesive window sealing tape for quick and simple sealing of indoor joints. The window sealing tape consists of a non-woven composite material with a functional film and laminated, acrylic-based self-adhesive strip and alternating full-surface adhesive finish for fastening to the window profile and masonry.

Fyrimunir

Vapour impermeable
Offers maximum protection against indoor air pollution - certified in accordance with GEV-EMICODE® EC1PLUS - very low emissions
Superb results when plastered or painted over
Split foil liner for easy handling
Adheres excellently to many surfaces that are commonly used in construction
Extremely supple on slightly uneven substrates

Góð ráð

Application:
The adhesive surfaces must be load-bearing and stable. The surfaces must be free from dust, release agents, oil, grease, moisture and ice.
When sealing house door and window connections, the release paper is removed from the self-adhesive strip of the window sealing tape, applied to the window frame and firmly pressed down or rolled on.
The window sealing tape can then be adhered to the wall material and rolled on. It is best to press the tape down using a press-on roller (0693 603 002) to ensure proper adhesion.
The window sealing tape can be pre-applied in the workshop. Due to the one-sided, full-surface self-adhesive, no additional bonding with an MS polymer adhesive is required.
The tape must always be installed without tension. Film overlaps must be at least 50 mm in width. The minimum adhesive surface on the component is 30 mm. For vertical joints, always glue the upper tape over the lower tape.
It is advisable to first carry out an adhesion and compatibility test on each surface. If necessary, pre-treat the surface with a spray primer (0894 800 500). Non-tight areas, corners and cavities are bonded with S78 bond and seal (0898 511 4).

Design

Self-adhesive surface/full self-adhesive surface

Faklig nærlýsing

Adhesive base	Acrylate
Backing material	Non-woven
Building material class	E - Normally inflammable
Building material class conditions	in accordance with DIN EN 13501
Building material class/conditions	E - Normally inflammable / in accordance with DIN EN 13501
Building material compatibility	Conventional building materials
Colour	White
Conditions to maintain shelf life from production	at room temperature, in the original container
Design	Self-adhesive surface/full self-adhesive surface
Length of roll	25 m
Max. air layer thickness equivalent to water-vapour diffusio	10 m

Max. processing temperature	45 °C
Max. temperature resistance	+80 °C
Min. processing temperature	5 °C
Min. temperature resistance	-40 °C
Min./max. processing temperature	5 to 45 °C
Min./max. temperature resistance	-40 to +80 °C
Roll width	70 mm
Shelf life	18 Month
Shelf life from production/conditions	18 Month / at room temperature, in the original container
Thickness	0.5 mm
Ultraviolet resistance	8 weeks, outdoor weathering

Væntað veiting: 29.–30. sep.

Bílegg í seinasta lagi mikudagin kl. 23:59 · bíleggingin verður send til Reca hósdagin

Window sealing tape for internal sealing, white, width 70 mm, length 25 m

4 stk í kartong

Vørunummar	0800504070
EAN	4066115428906
Pakkieind	pk (4 stk)
Adhesive base	Acrylate
Backing material	Non-woven
Building material class	E - Normally inflammable
Building material class conditions	in accordance with DIN EN 13501
Building material class/conditions	E - Normally inflammable / in accordance with DIN EN 13501
Veitari	RECA NORM