Vit dagføra vøruupplýsingarnar. Vit fara ígjøgnum allar vørulýsingarnar í vørusavninum. Upplýsingarnar um nýtsluøki og tilfar, sum vøran kann brúkast til, kunnu vera skeivar, meðan vit skráseta rætta tilfarið fyri hvørja vøru. Ert tú í iva, spyr tín kontaktpersón hjá A4.
The Vario window sealing tape is used for reliable interior and exterior sealing of connection joints for doors, windows and panels. Under window sills, the Vario window sealing tape can be used as a second water-bearing level.
Moisture-variable special film for sealing window and façade connection joints in indoor and outdoor areas in accordance with the requirements of the German Buildings Energy Act and the principles of the RAL "Guide to installation". Full-surface, adhesive window sealing tape for quick and simple sealing of indoor and outdoor joints. The Vario window sealing tape is a moisture-regulating film consisting of a non-woven composite with a functional film and laminated, acrylic-based self-adhesive strip and alternating, full-surface self-adhesive for fastening to window profiles and masonry. The highly functional film variably adapts to seasonal differences in temperature and humidity and thus achieves an excellent drying effect in the joint throughout the year.
Fyrimunir
- Can be used indoors and outdoors - no need to store two types of tape
- Fully self-adhesive surface - no additional adhesive required
- Dries out effectively and highly resistant to driving rain
- UV resistance up to 8 months
- Greater safety - no risk of confusion regarding indoor or outdoor use
- Can be stored for up to 24 months
- Air-tight and windproof, plus waterproof
- Special woven-fabric surface - can be plastered, painted and glued over
- Low inherent rigidity and high tear resistance
- High elasticity and flexible adjustment
Góð ráð
- Application:
- The adhesive surfaces must be load-bearing and stable. The surfaces must be free from dust, release agents, oil, grease, moisture and ice.
- When sealing house door and window connections or panels, the release paper is removed from the self-adhesive strip of the window sealing tape, applied to the window frame and firmly pressed down or rolled on.
- The window sealing tape can then be adhered to the wall material and rolled on. It is best to press the tape down using a press-on roller (0693 603 002) to ensure proper adhesion.
- The window sealing tape can be pre-applied in the workshop. Full-surface bonding must be established in the area to be plastered over. Due to the one-sided, full-surface self-adhesive, no additional bonding with an MS polymer adhesive is required.
- The tape must always be installed without tension. Film overlaps must be at least 50 mm in width. The minimum adhesive surface on the component is 30 mm. For vertical joints, always glue the upper tape over the lower tape.
- As soon as the adhesive has cured sufficiently for the window sealing tape to hold the weight of the plaster, it can be plastered over.
- It is advisable to first carry out an adhesion and compatibility test on each surface. If necessary, pre-treat the surface with a spray primer (0894 800 500). Non-tight areas, corners and cavities are bonded with S78 bond and seal (0898 511 4).
Self-adhesive surface/full self-adhesive surface
Faklig nærlýsing
| Adhesive base | Acrylate |
| Backing material | Non-woven |
| Building material class | E - Normally inflammable |
| Building material class conditions | in accordance with DIN EN 13501-1 |
| Building material class/conditions | E - Normally inflammable / in accordance with DIN EN 13501-1 |
| Building material compatibility | Conventional building materials |
| Colour | Black |
| Conditions to maintain shelf life from production | at 1°C to 20°C |
| Design | Self-adhesive surface/full self-adhesive surface |
| Joint permeability coefficient α (< 0.1) | Yes |
| Length of roll | 30 m |
| Max. air layer thickness equivalent to water-vapour diffusio | 10 m |
| Max. processing temperature | 45 °C |
| Max. temperature resistance | 80 °C |
| Min. air layer thickness equivalent to water-vapour diffusio | 0.05 m |
| Min. processing temperature | 5 °C |
| Min. resistance against driving rain (pressure) | 1050 Pa |
| Min. temperature resistance | -40 °C |
| Min./max. air layer thickness equivalent to water-vapour dif | 0.05-10 m |
| Min./max. processing temperature | 5 to 45 °C |
| Min./max. temperature resistance | -40 to 80 °C |
| Shelf life | 24 Month |
| Shelf life from production/conditions | 24 Month / at 1°C to 20°C |
| Ultraviolet resistance | 8 months, outdoor weathering |
| Water-vapour diffusion resistance (description) | Inside more impermeable than outside |
| Width | 90 mm |
Væntað veiting: 29.–30. sep.
Bílegg í seinasta lagi mikudagin kl. 23:59 · bíleggingin verður send til Reca hósdagin
Vario window sealing tape 90 mm, 30 m
Moisture-variable special film for sealing window and façade connection joints in indoor and outdoor areas in accordance with the requirements of the German Buildings Energy Act and the principles of the RAL "Guide to installation". Full-surface, adhesive window sealing tape for quick and simple sealing of indoor and outdoor joints. The Vario window sealing tape is a moisture-regulating film consisting of a non-woven composite with a functional film and laminated, acrylic-based self-adhesive strip and alternating, full-surface self-adhesive for fastening to window profiles and masonry. The highly functional film variably adapts to seasonal differences in temperature and humidity and thus achieves an excellent drying effect in the joint throughout the year.
6 stk í kartong
| Vørunummar | 0800500090 |
| EAN | 4066115462641 |
| Pakkieind | pk (6 stk) |
| Adhesive base | Acrylate |
| Backing material | Non-woven |
| Building material class | E - Normally inflammable |
| Building material class conditions | in accordance with DIN EN 13501-1 |
| Building material class/conditions | E - Normally inflammable / in accordance with DIN EN 13501-1 |
| Veitari | RECA NORM |
