1 / 4

Vit dagføra vøruupplýsingarnar. Vit fara ígjøgnum allar vørulýsingarnar í vørusavninum. Upplýsingarnar um nýtsluøki og tilfar, sum vøran kann brúkast til, kunnu vera skeivar, meðan vit skráseta rætta tilfarið fyri hvørja vøru. Ert tú í iva, spyr tín kontaktpersón hjá A4.

Application area

Diagonal bracing of roof and wall structures

Vørulýsing

1.5 mm 1.5 mm wind brace band is used for diagonal bracing of roof and wall constructions.

Fyrimunir

  • CE marking in line with EN 14545
  • 25 % lower weight for easier handling
  • High tensile strength due to patented edge shaping and use of high-quality steels

Góð ráð

  • The 1.5 mm wind brace band can be applied directly to the rafter top. Ensure that wind and tensile forces are correctly transferred to the roof structure. The wind brace band is secured with anchor nails. At least two nails must be attached at each rafter crossing point. Edge clearances and centre to centre distances must be observed for nails. Multiple wind brace bands can be arranged side by side to distribute stronger forces. The fasteners used must comply with EN 14592.
  • Suitable fasteners are:
  • Anchor nails to EN 14592 (article no. 0681 040 ...)

Faklig nærlýsing

ApprovalEN 14545:2009-02
Diameter of hole5 mm
Length of roll50 m
MaterialSteel
Material designationS350GD
Min. breaking elongation A8016 %
Min. tensile strength Rm420 N/mm²
Min. yield strength (ReH)350 N/mm²
SurfaceHot dip galvanized
Thickness1.5 mm
Weight22 kg
Width40 mm
Width x thickness40 x 1.5 mm

Væntað veiting: 29.–30. sep.

Bílegg í seinasta lagi mikudagin kl. 23:59 · bíleggingin verður send til Reca hósdagin

Wind brace band CE, galvanised steel, packaged 40x1.5x50,000

1.5 mm 1.5 mm wind brace band is used for diagonal bracing of roof and wall constructions.

Vørunummar0681013040
EAN4029484813674
Pakkieind1 stk
ApprovalEN 14545:2009-02
Diameter of hole5 mm
Length of roll50 m
MaterialSteel
Material designationS350GD
VeitariRECA NORM