1 / 4
Vit dagføra vøruupplýsingarnar. Vit fara ígjøgnum allar vørulýsingarnar í vørusavninum. Upplýsingarnar um nýtsluøki og tilfar, sum vøran kann brúkast til, kunnu vera skeivar, meðan vit skráseta rætta tilfarið fyri hvørja vøru. Ert tú í iva, spyr tín kontaktpersón hjá A4.
Field of Application
For use outdoors or in wet rooms if conditions are not particularly aggressive.
Fyrimunir
- Anchor rod expansion cones can be optimally adjusted using various anchorage depths for high load-bearing capacities in cracked and non-cracked concrete
- Low expansion pressure allows low spacing and edge distance
- Can be used in wet and dry concrete from drill hole diameter ≥ 14 mm (VMZ-A ≥ M12, VMZ-IG ≥ M10), even in drill holes full of water
- Application permissible above a surface temperature of -5°C
- Drill hole is sealed as well as possible after curing
- High temperature resistance (permanently up to +72°C, briefly up to +120°C)
- Opened cartridges can be re-used if they are re-sealed with the end cap
- Can also be used in concrete < C20/25 and in hard natural stone without construction permit
- Flexible application using threaded rods, washers and nuts or bolts made from strength class A4-70 and upwards
- Attractive look thanks to full selection of head types such as countersunk head, pan head, hexagon head, cylinder head etc.
- Fixings can be removed from the flush-mounted anchor
Faklig nærlýsing
| Anchor length (l) | 94 mm |
| Drill hole depth (h 1) | 98 mm |
| Effective anchoring depth (h ef) | 90 mm |
| Female-thread length | 24 mm |
| Material | Stainless steel A4 |
| Minimum component thickness (h min) | 130 mm |
| Nominal drill-bit diameter injection system (d 0) | 18 mm |
| Outer diameter | 16.5 mm |
| Required injection mortar | VMZ 330 |
| Surface | Coated |
| Thread type | Metric thread |
| Through-hole in the component to be connected (d f) | 14 mm |
| Torque during anchoring (T inst) | 25 |
Væntað veiting: 29.–30. sep.
Bílegg í seinasta lagi mikudagin kl. 23:59 · bíleggingin verður send til Reca hósdagin
VMZ-IG female thread sleeves, A4 90 M12 x 24/94
Field of Application: For use outdoors or in wet rooms if conditions are not particularly aggressive.
| Vørunummar | 0914812090 |
| EAN | 4029484495726 |
| Pakkieind | pk (10 stk) |
| Anchor length (l) | 94 mm |
| Drill hole depth (h 1) | 98 mm |
| Effective anchoring depth (h ef) | 90 mm |
| Female-thread length | 24 mm |
| Material | Stainless steel A4 |
| Veitari | RECA NORM |
