Vit dagføra vøruupplýsingarnar. Vit fara ígjøgnum allar vørulýsingarnar í vørusavninum. Upplýsingarnar um nýtsluøki og tilfar, sum vøran kann brúkast til, kunnu vera skeivar, meðan vit skráseta rætta tilfarið fyri hvørja vøru. Ert tú í iva, spyr tín kontaktpersón hjá A4.
- Betong
- Múrur og múrsteinar
For anchorages in non-cracked concrete such as base plates, supports and wall brackets and for mounting joint tapes. Anchoring in masonry: Canopies, door and window frames, facade substructures, battens, gates etc.
The universal injection system for non-cracked concrete, damp concrete, water-filled boreholes and masonry made from solid or perforated brick. The VM-EA injection system is an injection system for fixtures in non-cracked concrete and masonry. The system includes an epoxy acrylate-based, styrene-free chemical injection mortar in a mortar cartridge, as well as a VMU-A anchor rod, V-A or commercially available threaded rod with acceptance test certificate 3.1 (e.g. VM-A), as well as a nut and washer. When used in perforated brick, a perforated sleeve is also required.
Fyrimunir
- Versatile injection system for different applications in concrete and masonry
- Approved for non-cracked concrete
- Approved for installation in damp concrete and in water-filled drill holes
- Approved for aerated concrete and solid and perforated brick masonry; dry or wet
- Approved with anchor rods and for commercially available threaded rods with proven strength (acceptance test certificate 3.1)
- Approved with adjustable push-through perforated sleeve VM-SH 16 x 130/330 for bridging insulation systems and other soft
- surfaces
- Substrate temperature during application: -5°C to +40°C
- Ambient temperature after full curing: -40°C to +80°C
- Variable anchoring depths for added flexibility
- Opened cartridges can continue to be used with a new mixer nozzle
- Styrene free
Góð ráð
- Perforated sleeve VM-SH 16 x 130/330 enables fixtures in perforated brick through insulation boards.
- The tubular film cartridge (0911 005 300) must be cut open before use. To do this, pull the foil on the thread outwards and cut using scissors.
Coaxial cartridge, incl. mixer nozzle
Faklig nærlýsing
| Chemical basis | Epoxy acrylate |
Væntað veiting: 29.–30. sep.
Bílegg í seinasta lagi mikudagin kl. 23:59 · bíleggingin verður send til Reca hósdagin
VM-EA chemical injection mortar, 420 ml, coaxial cartridge with mixer nozzle
The universal injection system for non-cracked concrete, damp concrete, water-filled boreholes and masonry made from solid or perforated brick. The VM-EA injection system is an injection system for fixtures in non-cracked concrete and masonry. The system includes an epoxy acrylate-based, styrene-free chemical injection mortar in a mortar cartridge, as well as a VMU-A anchor rod, V-A or commercially available threaded rod with acceptance test certificate 3.1 (e.g. VM-A), as well as a nut and washer. When used in perforated brick, a perforated sleeve is also required.
12 stk í kartong
| Vørunummar | 0911005420 |
| EAN | 4029484827596 |
| Pakkieind | 1 stk |
| Chemical basis | Epoxy acrylate |
| Number of pieces per covering box | 12 PCS |
| Shelf life from production | 18 Month |
| Type description | VM-EA 420 chemical injection mortar |
| Veitari | RECA NORM |
