Vit dagføra vøruupplýsingarnar. Vit fara ígjøgnum allar vørulýsingarnar í vørusavninum. Upplýsingarnar um nýtsluøki og tilfar, sum vøran kann brúkast til, kunnu vera skeivar, meðan vit skráseta rætta tilfarið fyri hvørja vøru. Ert tú í iva, spyr tín kontaktpersón hjá A4.
Use on steels for best results. The ultra Mop zirconium comes into its own in tough applications on edges.
6-way overlapping lamella flaps - significantly more abrasive material in grinding area for maximum service life. The ultra Mop zirconium has specially designed lamella flaps that ensure an excellent stock removal rate. The mop disc is structured in such a way that the lamella flaps do not have much overlap, meaning they can be used until the vast majority of the surface is worn. The wide contact surface means that more abrasive grain is applied. This significantly increases the removal rate. 6-way overlapping lamella flaps - significantly more abrasive material on the disc for maximum service life.
Fyrimunir
- Cost efficiency thanks to optimum utilisation of the complete sanding surface due to specially shaped lamellae
- Wide contact surface of the lamellae - more abrasive grains are in use at the same time - for maximum stock removal rate
- Always a fresh abrasive layer: Wear exposes the lamella flaps underneath
- 50 % less noise, less vibration, faster work, better performance and better surface results in comparison to roughing.
- 100 % zirconium abrasive cloth - sharp abrasive grain is always available for very long service life and removal rates
Faklig nærlýsing
| Bore diameter | 22.23 mm |
| Diameter | 125 mm |
| Grid size | 40 |
Væntað veiting: 29.–30. sep.
Bílegg í seinasta lagi mikudagin kl. 23:59 · bíleggingin verður send til Reca hósdagin
Ultra Mop zirconium flap disc, 125 mm, grain 40
6-way overlapping lamella flaps - significantly more abrasive material in grinding area for maximum service life. The ultra Mop zirconium has specially designed lamella flaps that ensure an excellent stock removal rate. The mop disc is structured in such a way that the lamella flaps do not have much overlap, meaning they can be used until the vast majority of the surface is worn. The wide contact surface means that more abrasive grain is applied. This significantly increases the removal rate. 6-way overlapping lamella flaps - significantly more abrasive material on the disc for maximum service life.
| Vørunummar | 0666810040 |
| EAN | 4066115438776 |
| Pakkieind | pk (10 stk) |
| Bore diameter | 22.23 mm |
| Diameter | 125 mm |
| Grid size | 40 |
| Veitari | RECA NORM |