Vit dagføra vøruupplýsingarnar. Vit fara ígjøgnum allar vørulýsingarnar í vørusavninum. Upplýsingarnar um nýtsluøki og tilfar, sum vøran kann brúkast til, kunnu vera skeivar, meðan vit skráseta rætta tilfarið fyri hvørja vøru. Ert tú í iva, spyr tín kontaktpersón hjá A4.
Field of Application
For use outdoors or in wet rooms if there are no particularly aggressive conditions present.
Fyrimunir
- Only one threaded rod required for different clamping thicknesses as the rod can be adjusted as needed
- Can also be used for large clamping thicknesses, for example those found in heat insulation
- Threaded rods, length 1 m, for cutting
- Includes an acceptance test certificate 3.1 EN 10204 in each pack (proof of strength)
Góð ráð
- The use of standard threaded rods, washers and nuts is permissible when using the VMU injection system in masonry or in uncracked concrete if the following requirements are met:
- Material, dimensions and mechanical properties correspond to the specifications of the relevant approvals.
- Evidence of material and mechanical features of steel parts by acceptance test certificate 3.1 in line with EN 10204:2004; the certificates must be retained.
- The threaded rods must be marked with the required effective anchorage depth.
- Compliance with further requirements of the particular approval.
- If using these threaded rods in other injection systems, the requirements of the respective approval must be fulfilled.
- A4 stainless steel (specially coated hexagon nut)
Content remark
including acceptance test certificate 3.1
Faklig nærlýsing
| Anchor diameter | 24 mm |
| Anchor diameter x anchor length (l) | 24 x 1000 mm |
| Anchor length (l) | 1000 mm |
| DIN | 976-1 |
| Length | 1000 mm |
| Material | Stainless steel A4 |
| Nominal diameter | 24 mm |
| Nominal drill-bit diameter (d 0) | 28 mm |
| Required injection mortar | VMU plus polar 330 |
| Standards | DIN 976-1 |
| Suitable for non-cracked concrete | Yes |
| Thread diameter (metric thread) | 24 mm |
| Thread length (metric thread) | 1000 mm |
| Thread type | Metric thread |
| Thread type x nominal diameter x length | M24 x 1000 mm |
Væntað veiting: 29.–30. sep.
Bílegg í seinasta lagi mikudagin kl. 23:59 · bíleggingin verður send til Reca hósdagin
Threaded rod, 3.1 VM-A DIN 976-1 A4-70, for composite mortar systems M24x1,000
Field of Application: For use outdoors or in wet rooms if there are no particularly aggressive conditions present.
| Vørunummar | 091180424 |
| EAN | 4029484500246 |
| Pakkieind | pk (5 stk) |
| Anchor diameter | 24 mm |
| Anchor diameter x anchor length (l) | 24 x 1000 mm |
| Anchor length (l) | 1000 mm |
| DIN | 976-1 |
| Length | 1000 mm |
| Veitari | RECA NORM |