Vit dagføra vøruupplýsingarnar. Vit fara ígjøgnum allar vørulýsingarnar í vørusavninum. Upplýsingarnar um nýtsluøki og tilfar, sum vøran kann brúkast til, kunnu vera skeivar, meðan vit skráseta rætta tilfarið fyri hvørja vøru. Ert tú í iva, spyr tín kontaktpersón hjá A4.
- Træ
- Plast
The following versions can be used for attaching the listed elements Sleeve nut: metal, wooden and plastic profiles, curtain rails etc. Hook: lamps, lights, hanging baskets, ceiling decorations, hanging racks etc. Hexagon nut: stand-off installations, racks, wardrobes, lamps, ventilation, ducts, washbasins, wall-mounted WCs, urinals, suspended pipework etc. to all materials with sufficient cavity depth - refer to table for minimum cavity depths.
Fyrimunir
- Spring toggles require smaller cavity depths than toggle fixings
- The anchors are automatically expanded by spring force in any position
- Immediate load-bearing capacity
Góð ráð
- Minimum cavity depths and drill hole diameters must be observed.
- On the M10 version, a pre-mounted rubber plug fills the large drill hole.
With washer, nut and hook
Faklig nærlýsing
| Anchor length (l) | 95 mm |
| Design | With washer, nut and hook |
| Material | Steel |
| Min. breaking force | 0.3 kN |
| Minimum cavity depth (h) | 40 mm |
| Nominal drill hole diameter | 14 mm |
| Surface | Zinc plated |
| Thread diameter | 4.0 mm |
| Thread length (metric thread) | 70.0 mm |
| Washer diameter | 20.0 mm |
Væntað veiting: 29.–30. sep.
Bílegg í seinasta lagi mikudagin kl. 23:59 · bíleggingin verður send til Reca hósdagin
Spring toggle, zinc-plated steel, hook and washer, drill hole dia 14 mm, M4 x 95
Application: area: The following versions can be used for attaching the listed elements Sleeve nut: metal, wooden and plastic profiles, curtain rails etc. Hook: lamps, lights, hanging baskets, ceiling decorations, hanging racks etc. Hexagon nut: stand-off installations, racks, wardrobes, lamps, ventilation, ducts, washbasins, wall-mounted WCs, urinals, suspended pipework etc. to all materials with sufficient cavity depth - refer to table for minimum cavity depths.
| Vørunummar | 0904104095 |
| EAN | 4029484147144 |
| Pakkieind | pk (50 stk) |
| Anchor length (l) | 95 mm |
| Design | With washer, nut and hook |
| Material | Steel |
| Min. breaking force | 0.3 kN |
| Minimum cavity depth (h) | 40 mm |
| Veitari | RECA NORM |