Vit dagføra vøruupplýsingarnar. Vit fara ígjøgnum allar vørulýsingarnar í vørusavninum. Upplýsingarnar um nýtsluøki og tilfar, sum vøran kann brúkast til, kunnu vera skeivar, meðan vit skráseta rætta tilfarið fyri hvørja vøru. Ert tú í iva, spyr tín kontaktpersón hjá A4.
Drill - screw in - done The screw anchor is an innovative fastening system for securing assembly parts to concrete and other solid masonry. With its cutting-teeth design, the screw anchor cuts a thread in the drill hole as it is screwed in, creating a connection with mechanical interlocking and no expansion pressure.
Fyrimunir
- Shallow drill hole depths and small drill hole diameters
- Cutting teeth at the fore of the anchor ensure minimal tightening torque
- No expansion effect, hence minimal spacing and edge distance
- Quick and simple in-place installation, can be easily inserted by mechanical means
- Immediate load-bearing capacity - no waiting
- Attachment can be fully removed again
- No torque control required
- Broad range of uses due to numerous versions
- Stylish look with countersunk hexagon head
Faklig nærlýsing
| Anchor length (l) | 40 mm |
| Anchor size | 6 |
| Attachment height (t fix 1) | 5 mm |
| Drill hole depth with cleaning (h 1, 1) | 40 mm |
| Embedding depth (h nom1) | 35 mm |
| Head diameter | 14.5 mm |
| Internal drive | TX30 |
| Material | Steel |
| Max. recommended power output for setting tool | 160 Nm |
| Nominal drill-bit diameter (d 0) | 6 mm |
| Surface | Zinc plated |
| Thread diameter | 7.5 mm |
Væntað veiting: 29.–30. sep.
Bílegg í seinasta lagi mikudagin kl. 23:59 · bíleggingin verður send til Reca hósdagin
Screw anchor with pan head TSM 6x40 P TX30
Drill - screw in - done The screw anchor is an innovative fastening system for securing assembly parts to concrete and other solid masonry. With its cutting-teeth design, the screw anchor cuts a thread in the drill hole as it is screwed in, creating a connection with mechanical interlocking and no expansion pressure.
| Vørunummar | 0900206400 |
| EAN | 4066115042508 |
| Pakkieind | pk (100 stk) |
| Anchor length (l) | 40 mm |
| Anchor size | 6 |
| Attachment height (t fix 1) | 5 mm |
| Drill hole depth with cleaning (h 1, 1) | 40 mm |
| Embedding depth (h nom1) | 35 mm |
| Veitari | RECA NORM |
