Vit dagføra vøruupplýsingarnar. Vit fara ígjøgnum allar vørulýsingarnar í vørusavninum. Upplýsingarnar um nýtsluøki og tilfar, sum vøran kann brúkast til, kunnu vera skeivar, meðan vit skráseta rætta tilfarið fyri hvørja vøru. Ert tú í iva, spyr tín kontaktpersón hjá A4.
Drill - screw in - done The screw anchor is an innovative fastening system for securing assembly parts to concrete and other solid masonry. With its cutting-teeth design, the screw anchor cuts a thread in the drill hole as it is screwed in, creating a connection with mechanical interlocking and no expansion pressure. The extra-short design avoids the need for reinforcing bars and can be installed extremely quickly.
Fyrimunir
- Shallow drill hole depths and small drill hole diameters
- Cutting teeth at the front of the anchor ensure minimal tightening torque
- No expansion effect, therefore minimal spacing and edge distance
- Quick and simple in-place installation, can be easily inserted by mechanical means
- Immediate load-bearing capacity - no waiting
- Fastening can be fully removed again
- No torque control required
- Wide range of uses due to numerous versions
- Attractive appearance
Góð ráð
- Screw in with a cordless screwdriver or ratchet.
- The use of a tangential impact driver is not permitted!
Faklig nærlýsing
| Anchor length (l) | 40 mm |
| Anchor size | 6 |
| Connection thread | IT M10 |
| External drive | WS13 |
| Material | Steel, case-hardened |
| Nominal drill-bit diameter (d 0) | 6 mm |
| Surface | Zinc plated |
| Thread diameter | 7.5 mm |
| Washer diameter | 25.0 mm |
Væntað veiting: 29.–30. sep.
Bílegg í seinasta lagi mikudagin kl. 23:59 · bíleggingin verður send til Reca hósdagin
Screw anchor with internal thread TSM L 6x40 IT M8/M10 AF 13
Drill - screw in - done The screw anchor is an innovative fastening system for securing assembly parts to concrete and other solid masonry. With its cutting-teeth design, the screw anchor cuts a thread in the drill hole as it is screwed in, creating a connection with mechanical interlocking and no expansion pressure. The extra-short design avoids the need for reinforcing bars and can be installed extremely quickly.
| Vørunummar | 0900106040 |
| EAN | 4066115042515 |
| Pakkieind | pk (50 stk) |
| Anchor length (l) | 40 mm |
| Anchor size | 6 |
| Connection thread | IT M10 |
| External drive | WS13 |
| Material | Steel, case-hardened |
| Veitari | RECA NORM |
