Vit dagføra vøruupplýsingarnar. Vit fara ígjøgnum allar vørulýsingarnar í vørusavninum. Upplýsingarnar um nýtsluøki og tilfar, sum vøran kann brúkast til, kunnu vera skeivar, meðan vit skráseta rætta tilfarið fyri hvørja vøru. Ert tú í iva, spyr tín kontaktpersón hjá A4.
- Træ
- Betong
- Múrur og múrsteinar
The practical internal thread screw for various base materials offers a wide range of applications in interior finishing, e.g. securing suspended ceilings, cable ducts, pipes, brackets, cladding and much more. With ETA-23/0542, the TSM Multiground is approved for use in concrete. It is also suitable for use in masonry, autoclaved aerated concrete and wood. It can be installed easily using a tangential impact driver. This makes overhead work much easier.
Drill - screw in - done The screw anchor is an innovative fastening system for securing assembly parts to concrete and other solid masonry. With its cutting-teeth design, the screw anchor cuts a thread in the drill hole as it is screwed in, creating a connection with mechanical interlocking and no expansion pressure. Furthermore, it is the first screw anchor to have a flush-mounted female thread.
Fyrimunir
- Shallow drill hole depths and small drill hole diameters
- Cutting teeth at the front of the anchor ensure minimal tightening torque
- No expansion effect, therefore minimal spacing and edge distance
- Quick and simple in-place installation, can be easily inserted by mechanical means
- Immediate load-bearing capacity - no waiting
- Fastening can be fully removed again
- No torque control required
Faklig nærlýsing
| Anchor length (l) | 40 mm |
| Anchor size | 10 |
| Connection thread | IT M8 |
| Drill hole depth with cleaning (h 1, 1) | 50 mm |
| Female-thread length | 10 mm |
| Internal drive | TX55 |
| Material | Hardened steel |
| Max. recommended power output for setting tool | 180 Nm |
| Min. screw-in depth of threaded rod (Lsd) | 8 mm |
| Nominal drill-bit diameter (d 0) | 10 mm |
| Screw-in depth (h nom.standard, 1) | 40 mm |
| Surface | Zinc plated |
| Thread diameter | 12 mm |
Væntað veiting: 29.–30. sep.
Bílegg í seinasta lagi mikudagin kl. 23:59 · bíleggingin verður send til Reca hósdagin
Screw anchor Multiground TSM 10x40 IT 8x10 TX55
Drill - screw in - done The screw anchor is an innovative fastening system for securing assembly parts to concrete and other solid masonry. With its cutting-teeth design, the screw anchor cuts a thread in the drill hole as it is screwed in, creating a connection with mechanical interlocking and no expansion pressure. Furthermore, it is the first screw anchor to have a flush-mounted female thread.
| Vørunummar | 0900110040 |
| EAN | 4066115041495 |
| Pakkieind | pk (100 stk) |
| Anchor length (l) | 40 mm |
| Anchor size | 10 |
| Connection thread | IT M8 |
| Drill hole depth with cleaning (h 1, 1) | 50 mm |
| Female-thread length | 10 mm |
| Veitari | RECA NORM |
