1 / 2
Vit dagføra vøruupplýsingarnar. Vit fara ígjøgnum allar vørulýsingarnar í vørusavninum. Upplýsingarnar um nýtsluøki og tilfar, sum vøran kann brúkast til, kunnu vera skeivar, meðan vit skráseta rætta tilfarið fyri hvørja vøru. Ert tú í iva, spyr tín kontaktpersón hjá A4.
Vørulýsing
Plug-in welding piece. With pin detent. Black oxide.
Góð ráð
- The maximum torque load of plug-in tools is based on DIN 899 and can be lower than the maximum torque of the tool used.
- The torque wrench must be inspected (calibrated) at specified intervals, as for every measuring tool.
- Calibration certificates are valid for a maximum of 12 months from the time of commissioning.
- If the tool is used frequently, this period should be reduced. A period should be specified after an assessment in line with DIN EN ISO 6789, section 5.3.2, after 5000 actuations.
- An electrode for tool steel must be used for the welding process (e.g. Oerlikon Supranox RS 312).
Type
For tool chuck 9 x 12 mm
Faklig nærlýsing
| Height | 14.5 mm |
| Mount square | 9 x 12 mm |
| Thickness | 14.5 mm |
| Type | For tool chuck 9 x 12 mm |
| Weight | 47 g |
| Weld measure | 8 x 14 mm |
| Width | 14.0 mm |
Væntað veiting: 29.–30. sep.
Bílegg í seinasta lagi mikudagin kl. 23:59 · bíleggingin verður send til Reca hósdagin
RECA weld-on piece insert tool for torque wrench w. interch. sys. 9x12
Plug-in welding piece. With pin detent. Black oxide.
| Vørunummar | 0700502905 |
| EAN | 4029484521791 |
| Pakkieind | 1 stk |
| Height | 14.5 mm |
| Mount square | 9 x 12 mm |
| Thickness | 14.5 mm |
| Type | For tool chuck 9 x 12 mm |
| Weight | 47 g |
| Veitari | RECA NORM |
