1 / 3
Vit dagføra vøruupplýsingarnar. Vit fara ígjøgnum allar vørulýsingarnar í vørusavninum. Upplýsingarnar um nýtsluøki og tilfar, sum vøran kann brúkast til, kunnu vera skeivar, meðan vit skráseta rætta tilfarið fyri hvørja vøru. Ert tú í iva, spyr tín kontaktpersón hjá A4.
Vørulýsing
Plug-in reversible ratchet with finely toothed reversible ratchet head. With trigger function. With pin detent on plug-in square drive. Chrome-plated.
Góð ráð
- The maximum torque load of plug-in tools is based on DIN 899 and can be lower than the maximum torque of the tool used.
- The torque wrench must be inspected (calibrated) at specified intervals, as for every measuring tool.
- Calibration certificates are valid for a maximum of 12 months from the time of commissioning.
- If the tool is used frequently, this period should be reduced. A period should be specified after an assessment in line with DIN EN ISO 6789, section 5.3.2, after 5000 actuations.
Type
For tool mount 9 x 12 mm
Faklig nærlýsing
| Head diameter | 27 mm |
| Height | 25 mm |
| Mount square | 9 x 12 mm |
| Tip size | 1/4 inch |
| Type | For tool mount 9 x 12 mm |
| Weight | 75 g |
Væntað veiting: 29.–30. sep.
Bílegg í seinasta lagi mikudagin kl. 23:59 · bíleggingin verður send til Reca hósdagin
RECA push-fit ratchet 1/4" for torque wrench w. interch. sys. 9x12
Plug-in reversible ratchet with finely toothed reversible ratchet head. With trigger function. With pin detent on plug-in square drive. Chrome-plated.
| Vørunummar | 0700502902 |
| EAN | 4029484521760 |
| Pakkieind | 1 stk |
| Head diameter | 27 mm |
| Height | 25 mm |
| Mount square | 9 x 12 mm |
| Tip size | 1/4 inch |
| Type | For tool mount 9 x 12 mm |
| Veitari | RECA NORM |
