1 / 2
Vit dagføra vøruupplýsingarnar. Vit fara ígjøgnum allar vørulýsingarnar í vørusavninum. Upplýsingarnar um nýtsluøki og tilfar, sum vøran kann brúkast til, kunnu vera skeivar, meðan vit skráseta rætta tilfarið fyri hvørja vøru. Ert tú í iva, spyr tín kontaktpersón hjá A4.
Vørulýsing
Plug-in box-end wrench for torque wrench with 14 x 18 mm tool mount. With pin detent on plug-in square drive. Chrome-plated.
Góð ráð
- The maximum torque load of plug-in tools is based on DIN 899 and can be lower than the maximum torque of the tool used.
- The torque wrench must be inspected (calibrated) at specified intervals, as for every measuring tool.
- Calibration certificates are valid for a maximum of 12 months from the time of commissioning.
- If the tool is used frequently, this period should be reduced. A period should be specified after an assessment in line with DIN EN ISO 6789, section 5.3.2, after 5000 actuations.
Faklig nærlýsing
| Height | 12.0 mm |
| Mount square | 14 x 18 mm |
| Thickness | 25.0 mm |
| Weight | 125 g |
| Width | 30.5 mm |
| Width across flats | 19 mm |
Væntað veiting: 29.–30. sep.
Bílegg í seinasta lagi mikudagin kl. 23:59 · bíleggingin verður send til Reca hósdagin
RECA push-fit box wrench 14x18 mm/AF 19
Plug-in box-end wrench for torque wrench with 14 x 18 mm tool mount. With pin detent on plug-in square drive. Chrome-plated.
| Vørunummar | 0700503119 |
| EAN | 4029484521692 |
| Pakkieind | 1 stk |
| Height | 12.0 mm |
| Mount square | 14 x 18 mm |
| Thickness | 25.0 mm |
| Weight | 125 g |
| Width | 30.5 mm |
| Veitari | RECA NORM |
