Vit dagføra vøruupplýsingarnar. Vit fara ígjøgnum allar vørulýsingarnar í vørusavninum. Upplýsingarnar um nýtsluøki og tilfar, sum vøran kann brúkast til, kunnu vera skeivar, meðan vit skráseta rætta tilfarið fyri hvørja vøru. Ert tú í iva, spyr tín kontaktpersón hjá A4.
The KWS fire protection filler is a system component for creating the KWS cable, pipe or combination soft stop fire system EI 90. For the adhesive bonding of the mineral fibreboard components and for sealing larger joints and residual openings within the soft stop fire system or between the soft stop fire system and the component. System component for creating the KWS continuous collar partition system for sealing the ring gap between the component and continuous collar. The width of the ring gap must not exceed 10 mm. The KWS fire protection filler can be applied using a trowel or directly from the cartridge.
The KWS fire protection filler is an ablative, highly viscous and non-hydroscopic, water-based fire protection coating. It is a construction material consisting mainly of chemically/physically active substances and binders.
Fyrimunir
- Solvent-free, APEO-free, no VOC emissions
- Free from halogen, formaldehyde, borate and plasticisers
- Oil- and petrol-resistant
- Suitable for indoor areas, damp rooms and covered outdoor areas (without driving rain)
- Resistant to ageing, mechanically resistant
- Flexible after drying even with thick layers
- Temperature-resistant up to -20°C after drying
Góð ráð
- Please observe the respective proof of use before installation and fit according to specifications!
Faklig nærlýsing
| Building material class | B2 - Normally inflammable |
| Colour | White |
| Conditions to maintain shelf life from production | at 5°C to 30°C |
| Container | Cartridge |
| Max. moulded density | 1.45 g/cm³ |
| Max. processing temperature | 30 °C |
| Min. moulded density | 1.28 g/cm³ |
| Min. processing temperature | 8 °C |
| Min./max. moulded density | 1.28-1.45 g/cm³ |
| Min./max. processing temperature | 8 to 30 °C |
| pH value | 7,45–7,55 |
| Shelf life from production/conditions | 18 Month / at 5°C to 30°C |
| Ultraviolet resistance | Yes |
| Viscosity/consistency | High viscosity |
Væntað veiting: 29.–30. sep.
Bílegg í seinasta lagi mikudagin kl. 23:59 · bíleggingin verður send til Reca hósdagin
RECA KWS fire protection filler, cartridge, 310 ml
The KWS fire protection filler is an ablative, highly viscous and non-hydroscopic, water-based fire protection coating. It is a construction material consisting mainly of chemically/physically active substances and binders.
20 stk í kartong
| Vørunummar | 0839210310 |
| EAN | 4066115005572 |
| Building material class | B2 - Normally inflammable |
| Colour | White |
| Conditions to maintain shelf life from production | at 5°C to 30°C |
| Container | Cartridge |
| Max. moulded density | 1.45 g/cm³ |
| Veitari | RECA NORM |
- Safety Data Sheet04926465.PDFLat PDF upp