RECA drywall bit holder 1/4 inch

High-quality bit spacer with aluminium sleeve and strong permanent magnet for use in dry walling and interior construction. The screw depth can be adjusted continuously and allows screws to be countersunk until flush. The rear aluminium ring can be used to "lock" the configured position. As a result, the screw depth is not adjusted.

Field of Application: Dry walling, interior finishing

Innritan verður skjótt tøk — fá prísir við at seta teg í samband við okkum: a4@a4.fo
Vørunummar0702880060
EAN4029484828524
Adapter type1/4 inch, E 6.3
Construction product0 - not applicable
Drive1/4 inch
Length50.0 mm
Typewith magnet
SupplierRECA NORM


High-quality bit spacer with aluminium sleeve and strong permanent magnet for use in dry walling and interior construction.

The screw depth can be adjusted continuously and allows screws to be countersunk until flush. The rear aluminium ring can be used to "lock" the configured position. As a result, the screw depth is not adjusted.


Field of Application:

Dry walling, interior finishing

Advantages:

An O-ring is located in the front aluminium sleeve. This prevents the ingress of dust into the chuck. As a result, it takes a little more effort to insert the bit into the chuck.
The best way is to remove the front aluminium sleeve, insert the bit into the chuck and screw the sleeve back on.

Type:

with magnet

Advice:

Suitable for 1/4 inch bits with hexagon head drive.

Suitable for power screwdrivers with a chuck conforming to DIN ISO 1173-F6.3.