1 / 10
Vit dagføra vøruupplýsingarnar. Vit fara ígjøgnum allar vørulýsingarnar í vørusavninum. Upplýsingarnar um nýtsluøki og tilfar, sum vøran kann brúkast til, kunnu vera skeivar, meðan vit skráseta rætta tilfarið fyri hvørja vøru. Ert tú í iva, spyr tín kontaktpersón hjá A4.
Field of Application
Tilfar
- Træ
- Til alskyns nýtslu
Universal use, interior finishing, construction of roofs, furniture and elements, structural wood construction, over-rafter insulation. Wherever chipboard screws and timber screws are used.
Vørulýsing
Diameter 3.0 mm-10.0 mm
Fyrimunir
- European Technical Approval ETA–12/0373. From diameter 4.0 mm
- HiLo thread — reduced screw-in times and high technical values
- Friction part for lower screw-in resistance and longer battery life for screw-in units
- Patented tip with ridged core for precise and immediate application and reduced splitting effect
- Countersunk milling pocket head makes for fast, clean countersinking and prevents the wood from splitting.
- Fewer bit changes — one drive size for dia. 3.5–5.0 mm, TX 20
- Additional drive size for dia. 5 mm, TX 25 for carpentry
- Premium Yellwin 500+ surface. Up to ten-times greater corrosion protection in comparison to standard zinc-plated coatings on the market (iridescent blue)
Góð ráð
- Do not use the screw in applications with direct exposure to the weather or in wet rooms with atmospheres containing chlorine gas.
Faklig nærlýsing
| Approval | ETA-12/0373 |
| End milling cutter | Yes |
| Head diameter | 12 mm |
| Head type | Countersunk milling pocket head |
| Internal drive | TX30 |
| Length | 220 mm |
| Material | Steel |
| Nominal diameter | 6 mm |
| Surface | Zinc plated thick-layer passivation |
| Thread design | Partial thread |
| Thread form | Hilo, double start |
| Thread length (thread for woodwork) | 64 mm |
| Thread type | Wood screw thread |
Væntað veiting: 10.–11. nov.
Bílegg í seinasta lagi mikudagin kl. 23:59 · bíleggingin verður send til Reca hósdagin
RAPID timber screw, c/s milling pocket head, Yellwin 500+, PT, TX 30 6.0x220/70
Diameter 3.0 mm-10.0 mm
| Vørunummar | 0160160220 |
| EAN | 4029484928491 |
| Pakkieind | pk (100 stk) |
| Approval | ETA-12/0373 |
| End milling cutter | Yes |
| Head diameter | 12 mm |
| Head type | Countersunk milling pocket head |
| Internal drive | TX30 |
| Veitari | RECA NORM |