Rafter-to-purlin connector, universal 250, galv. stl, ETA-14/0105, 35x250x35 mm

Universal Universal rafter-to-purlin connectors can be used for mounting intersecting timbers of any kind. They can be used both on the left and right

Application: area: Universal rafter-to-purlin connectors are used, for example, for securing the position of purlins on beams and for absorbing forces that act in the direction of the longitudinal axis of the rafter-to-purlin connectors.

Innritan verður skjótt tøk — fá prísir við at seta teg í samband við okkum: a4@a4.fo

Vørunummar	0681011250
EAN	4029484813599
Approval	ETA-14/0105
Construction product	0 - not applicable
Depth	35 mm
Design	Universal
Height	250 mm
Supplier	RECA NORM

Universal

Universal rafter-to-purlin connectors can be used for mounting intersecting timbers of any kind. They can be used both on the left and right

Application area:

Universal rafter-to-purlin connectors are used, for example, for securing the position of purlins on beams and for absorbing forces that act in the direction of the longitudinal axis of the rafter-to-purlin connectors.

Advantages:

European Technical Approval (ETA-14/0105)
Suitable for universal use

Design:

Universal

Advice:

The universal rafter-to-purlin connectors can be attached both on the left and right. The universal rafter-to-purlin connectors have nail holes with a diameter of 5 mm. To achieve the best possible position stability, 2 rafter-to-purlin connectors should always be used per connection. The fasteners used must comply with EN 14592.
Suitable fasteners are:
• Anchor nails to EN 14592 (article no. 0681 040 ...)

Rafter-to-purlin connector, universal 250, galv. stl, ETA-14/0105, 35x250x35 mm

Allar útgávur

Rafter-to-purlin connector, universal 170, galv. stl, ETA-14/0105, 35x170x35 mm

Rafter-to-purlin connector, universal 210, galv. stl, ETA-14/0105, 35x210x35 mm