Right/left

Right/left rafter-to-purlin connectors can be used for mounting intersecting timbers of any kind.

Application area:

Right/left rafter-to-purlin connectors are used, for example, for securing the position of purlins on beams and for absorbing forces that act in the direction of the longitudinal axis of the rafter-to-purlin connectors.

Advantages:

• European Technical Approval (ETA-14/0105)

Design:

Type - right and left

Advice:

Right/left rafter-to-purlin connectors can only be attached on one side - they are intended for use in pairs. The right/left rafter-to-purlin connectors have nail holes with a diameter of 5 mm. To achieve the best possible position stability, 2 rafter-to-purlin connectors should always be used per connection. The fasteners used must comply with EN 14592.
Suitable fasteners are:
• Anchor nails to EN 14592 (article no. 0681 040 ...)