Vit dagføra vøruupplýsingarnar. Vit fara ígjøgnum allar vørulýsingarnar í vørusavninum. Upplýsingarnar um nýtsluøki og tilfar, sum vøran kann brúkast til, kunnu vera skeivar, meðan vit skráseta rætta tilfarið fyri hvørja vøru. Ert tú í iva, spyr tín kontaktpersón hjá A4.
- Gipsplátur
For mounting lightweight attachments, e.g. electrical installations, lighting, pictures, lightweight shelves etc. in gypsum plasterboard/gypsum fibreboard panels
Special anchor for fixings in gypsum plasterboard/gypsum fibreboard panels For quick and easy installation in gypsum plasterboard/gypsum fibreboard panels, without pre-drilling and without additional setting tool
Fyrimunir
- Fast assembly - no need for a special setting tool and pre-drilling
- Lathe centre ensures easy positioning and drilling into the panel
- Innovative 1/4 inch drive enables setting of the plug with PZ bit, TX bit etc.
- Power transmission via the 1/4 inch hexagon mounting of the bit
- Plasterboard plug and the screw can be screwed in using the same bit
- Component can be fixed with wood or chipboard screws
- High-quality die-cast zinc
- Mechanical interlock mounting
Góð ráð
- Screw directly into plasterboard panel until flush with a low torque
Faklig nærlýsing
| Anchor length (l) | 39 mm |
| Bit holder | 0 - not applicable |
| Collar diameter | 14.5 mm |
| Hole diameter in component (d Bau) | 6.5 mm |
| Internal drive | HS1/4 inch |
| Material | Die-cast zinc |
| Max. temperature resistance | 80 °C |
| Min. board thickness/mirror thickness (d a) | 9.5 mm |
| Min. temperature resistance | -40 °C |
| Recommended tensile load in plasterboard 12,5 mm | 0.1 kN |
| Recommended tensile load in plasterboard 2 x 12,5 mm | 0.12 kN |
| Required particle-board screw diameter | 4.5 mm |
| Required wood screw diameter (d scr.wood) | 4 - 4.5 mm |
Plasterboard plug ZD, die-cast zinc
Special anchor for fixings in gypsum plasterboard/gypsum fibreboard panels For quick and easy installation in gypsum plasterboard/gypsum fibreboard panels, without pre-drilling and without additional setting tool
| Vørunummar | 0905801030 |
| EAN | 4066115000539 |
| Pakkieind | pk (100 stk) |
| Anchor length (l) | 39 mm |
| Bit holder | 0 - not applicable |
| Collar diameter | 14.5 mm |
| Hole diameter in component (d Bau) | 6.5 mm |
| Internal drive | HS1/4 inch |
| Veitari | RECA NORM |