Vit dagføra vøruupplýsingarnar. Vit fara ígjøgnum allar vørulýsingarnar í vørusavninum. Upplýsingarnar um nýtsluøki og tilfar, sum vøran kann brúkast til, kunnu vera skeivar, meðan vit skráseta rætta tilfarið fyri hvørja vøru. Ert tú í iva, spyr tín kontaktpersón hjá A4.
The one-sided wood connectors are fixed with bolts which pass through the wood, the tooth plate connector and then through the steel beam that is being connected. After the hole has been drilled into the wood, the tooth plate connector is pressed into the wood. If necessary, use a hydraulic press-in tool. Approval The one-sided tooth plate connectors from BB Stanz- und Umformtechnik are subject to the harmonised standard DIN EN 14545
Góð ráð
- Steel quality
- S 250 GD + Z275
- Yield strength ReH ≥ 250 N/mm²
- Tensile strength Rm ≥ 320 N/mm²
- Breaking elongation A80 ≥ 19 %
- Corrosion protection of 275 g/m² on both sides - corresponds to a zinc layer thickness of approx. 20 μm
- Do not use the screw in applications with direct exposure to the weather or in wet rooms with atmospheres containing chlorine gas.
One side
Faklig nærlýsing
| Design | One side |
| DIN | 1052 |
| Internal diameter | 12.4 mm |
| Material | Steel |
| Outer diameter | 62.0 mm |
| Standards | DIN 1052 |
| Surface | Zinc plated |
| Thickness | 1.20 mm |
Væntað veiting: 29.–30. sep.
Bílegg í seinasta lagi mikudagin kl. 23:59 · bíleggingin verður send til Reca hósdagin
One-sided push-in dowels, can be used in acc. with DIN 1052, galv. steel, 62 mm
The one-sided wood connectors are fixed with bolts which pass through the wood, the tooth plate connector and then through the steel beam that is being connected. After the hole has been drilled into the wood, the tooth plate connector is pressed into the wood. If necessary, use a hydraulic press-in tool. Approval The one-sided tooth plate connectors from BB Stanz- und Umformtechnik are subject to the harmonised standard DIN EN 14545
| Vørunummar | 045101162 |
| EAN | 4029484078134 |
| Pakkieind | pk (50 stk) |
| Design | One side |
| DIN | 1052 |
| Internal diameter | 12.4 mm |
| Material | Steel |
| Outer diameter | 62.0 mm |
| Veitari | RECA NORM |