Vit dagføra vøruupplýsingarnar. Vit fara ígjøgnum allar vørulýsingarnar í vørusavninum. Upplýsingarnar um nýtsluøki og tilfar, sum vøran kann brúkast til, kunnu vera skeivar, meðan vit skráseta rætta tilfarið fyri hvørja vøru. Ert tú í iva, spyr tín kontaktpersón hjá A4.
- Træ
- Betong
Multiple attachment of non-load-bearing systems with approval In cracked concrete (concrete tension zone) and uncracked concrete (compression zone) E.g. lightweight ceiling cladding and suspended ceilings, pipes, cable trays, metal profiles, perforated strips, wire hangers, vernier hangers, wooden strips, wooden slats, square timbers etc. For use in reinforced or non-reinforced standard concrete with a concrete compressive strength of min. C12/15 and max. C50/60 in accordance with EN 206-1:2000-12 May only be used in dry indoor room conditions
Fyrimunir
- Quick and easy installationLess drilling required thanks to reduced effective anchorage depth of 25 mmEasy insertion: Simply hammer in - no torque requiredNo special drills or setting tools required
- In-place installation
- Minimal spacing and edge distance
- Elegant, attractive design
- Load-controlled expansion anchor. Expands when subjected to load
Góð ráð
- Anchors in a redundant non-structural system in concrete: European Technical Assessment ETA-11/0240
- Fire resistance: R30, R60, R90, R120 (base material: concrete C20/25 to C50/60): Technical Report TR 020 "Evaluation of anchorages in concrete concerning resistance to fire" (included in ETA-11/0240)
Faklig nærlýsing
| Anchor diameter | 6 mm |
| Anchor diameter x anchor length (l) | 6 x 54 mm |
| Anchor length (l) | 54 mm |
| Drill hole depth (h 0) | 40 mm |
| Drill hole depth reduced (h 0, red) | 35 mm |
| Effective anchoring depth (h ef) | 30 mm |
| Effective anchoring depth reduced (h ef, red) | 25 mm |
| Material | Steel |
| Max. attachment height (t fix) | 10 mm |
| Max. attachment height reduced (t fix, red) | 15 mm |
| Minimum component thickness (h min) | 80 mm |
| Nominal drill-bit diameter (d 0) | 6 mm |
| Surface | Zinc plated |
| Through-hole in the component to be connected (d f) | 7 mm |
| Torque during anchoring (T inst) | 4 Nm |
Væntað veiting: 29.–30. sep.
Bílegg í seinasta lagi mikudagin kl. 23:59 · bíleggingin verður send til Reca hósdagin
N 6-10-15/54 nail anchor with M6 thread, zn pl steel, WAF 10 M6x54
Application: area: Multiple attachment of non-load-bearing systems with approval In cracked concrete (concrete tension zone) and uncracked concrete (compression zone) E.g. lightweight ceiling cladding and suspended ceilings, pipes, cable trays, metal profiles, perforated strips, wire hangers, vernier hangers, wooden strips, wooden slats, square timbers etc. For use in reinforced or non-reinforced standard concrete with a concrete compressive strength of min. C12/15 and max. C50/60 in accordance with EN 206-1:2000-12 May only be used in dry indoor room conditions
Field of Application: Suspended ceilings, pipes, cladding, cable trays
| Vørunummar | 0904000654 |
| EAN | 4029484931873 |
| Pakkieind | pk (200 stk) |
| Anchor diameter | 6 mm |
| Anchor diameter x anchor length (l) | 6 x 54 mm |
| Anchor length (l) | 54 mm |
| Drill hole depth (h 0) | 40 mm |
| Drill hole depth reduced (h 0, red) | 35 mm |
| Veitari | RECA NORM |
