The special anchor for mounting in external thermal insulation composite systems (ETICS)

This pre-mounted insulation anchor is a mounting solution developed for ETICS (external thermal insulation composite systems)
with insulation thickness greater than 100 mm. Pipe clamps
and other components with an M8 female threaded connection are mounted on the RECA ID 95 VM
insulation anchor. These clamps are then used to mount downpipes for
roof drainage. The RECA ID 95 VM insulation anchor is equipped with a
drill tip. This makes it possible to mount it directly after plastering without
pre-drilling into most ETICS (external thermal insulation composite systems) made from rigid foam panels, polystyrene panels,
Styrofoam panels, Heraklith panels and wood fibre insulating panels
(pre-drilling to 14 mm required). The set screw has a zinc flake coating, therefore offering long-term corrosion protection. The set screw is adjustable up to 25 mm. The moulded cover cap guarantees a clean connection and is
also fitted with an EPDM seal to protect against moisture.

Application area:

For mounting downpipe clamps, signs, lighting and other components in
external thermal insulation composite systems (ETICS) e.g. rigid foam panels, expandable polystyrene panels, Styrofoam panels, Heraklith panels and in wood fibre insulating panels
(pre-drilling to 13 mm required)

Field of Application:

For mounting pipe clamps and other components with an M8 female threaded connection in
external thermal insulation composite systems made from rigid foam panels, polystyrene panels,
Styrofoam panels, Heraklith panels and in wood fibre insulating panels (pre-drilling to
13 mm required)

Advantages:

• The perfect solution for mounting downpipe clamps in ETICS: easy, flexible, fast and adjustable
• Thermal bridge-free mounting directly in the insulation material
• Pre-assembled special set screw, no loose parts
• Ideal distance of 30 mm between the downpipe and the wall
• Can be manually adjusted a further 25 mm
• Special set screw with a zinc flake coating or made of A2 stainless steel for good corrosion protection
• Integrated sealing washer made of weather-resistant rubber, no additional sealing necessary
• No pre-drilling Robust, self-drilling (ETICS plaster ≤ 7 mm) nylon dowel

Content remark:

Pack of 16 = 4x4 pieces in polythene bags, insulation anchor pre-mounted with adjustable M8 set screw

Advice:

Pre-drill wood fibre insulating panels to 13 mm
To adjust the set screw, secure the anchor with AF 17 to prevent the anchor from unscrewing