Vit dagføra vøruupplýsingarnar. Vit fara ígjøgnum allar vørulýsingarnar í vørusavninum. Upplýsingarnar um nýtsluøki og tilfar, sum vøran kann brúkast til, kunnu vera skeivar, meðan vit skráseta rætta tilfarið fyri hvørja vøru. Ert tú í iva, spyr tín kontaktpersón hjá A4.
- Stál
- Betong
For securing Suspended items in heating, sanitation and ventilation, anchoring with threaded rods and bolts, flat steel, profiled steel in concrete with a strength class ≥ C20/25 and ≤ C50/60. Load range: 1.2 kN–28.6 kN.
For the multiple attachment of non-load-bearing systems in cracked and non-cracked concrete The hammerset anchor E is a drop-in anchor for anchoring in concrete. The anchor is set into the drill hole in cotter-pin installation and reliably expanded using a manual or mechanical spreading tool and can be loaded straight away. The mounting can easily be loosened again. No need for installation torque.
Fyrimunir
- Small drill hole depth, high load-bearing capacity
- Permitted as single anchors for fixing in non-cracked concrete, with an anchoring depth ≥ 30 mm
- Labour-saving and quick assembly through stop bit and attachable tool
- Immediate load-bearing capacity - no waiting
- Fixings can be removed from the flush-mounted anchor
Góð ráð
- Fire protection tested in concrete C20/25 to C50/60.
With plunged boss With collar
Faklig nærlýsing
| Anchor diameter | 16 mm |
| Anchor diameter x anchor length (l) | 16 x 23 mm |
| Anchor length (l) | 23 mm |
| Design | With collar |
| Drill hole depth (h 0) | 65 mm |
| Effective anchoring depth (h ef) | 65 mm |
| Material | Steel |
| Min. centre-to-centre distance (s min) | 150 mm |
| Min. edge clearance (c min) | 200 mm |
| Nominal drill-bit diameter (d 0) | 20 mm |
| Surface | Zinc plated |
| Through-hole in the component to be connected (d f) | 18 mm |
| Torque during anchoring (T inst) | 60 Nm |
Væntað veiting: 29.–30. sep.
Bílegg í seinasta lagi mikudagin kl. 23:59 · bíleggingin verður send til Reca hósdagin
Hammerset anchor ES steel, zinc-plated, with collar M 16x65
For the multiple attachment of non-load-bearing systems in cracked and non-cracked concrete The hammerset anchor E is a drop-in anchor for anchoring in concrete. The anchor is set into the drill hole in cotter-pin installation and reliably expanded using a manual or mechanical spreading tool and can be loaded straight away. The mounting can easily be loosened again. No need for installation torque.
| Vørunummar | 0904816065 |
| EAN | 4029484913459 |
| Pakkieind | pk (25 stk) |
| Anchor diameter | 16 mm |
| Anchor diameter x anchor length (l) | 16 x 23 mm |
| Anchor length (l) | 23 mm |
| Design | With collar |
| Drill hole depth (h 0) | 65 mm |
| Veitari | RECA NORM |