Vit dagføra vøruupplýsingarnar. Vit fara ígjøgnum allar vørulýsingarnar í vørusavninum. Upplýsingarnar um nýtsluøki og tilfar, sum vøran kann brúkast til, kunnu vera skeivar, meðan vit skráseta rætta tilfarið fyri hvørja vøru. Ert tú í iva, spyr tín kontaktpersón hjá A4.
- Betong
For securing Threaded rods, cable conduits, pipelines, mounting rails, ventilation ducts, suspended ceilings, sprinkler systems, metal structures, grilles, formwork supports etc. on standard concrete with a strength class ≥ C20/25 and ≤ C50/60, also for use outdoors or in wet rooms if conditions are not particularly aggressive.
For non-cracked concrete and for the multiple attachment of non-load-bearing systems to concrete The ES A4 hammerset anchor is an A4 stainless steel drop-in anchor for cotter-pin installation that is flush-mounted in concrete surfaces. The anchor is used to drive in the deformation-controlled cone. This expands the anchor to embed it securely in concrete with different compression strengths. The installed component can be removed and remounted without affecting load capacity.
Fyrimunir
- Small drill hole depth, high load-bearing capacity
- Two-stage expansion cone for reduced centre-to-centre distances and edge distances
- Easy installation with minimal driving effort even in high-strength building materials or when using worn drills
- Immediate load-bearing capacity - no waiting
- Fixings can be removed from the flush-mounted anchor
- No load testing required (see ETA approvals)
Góð ráð
- It is essential to observe drill hole depth and drill hole diameter
- Drive the cone in using the expander tool until the setting tool makes contact with the wall plug body
- Minimum screw length = component thickness + minimum screw-in depth
- Maximum screw length = component thickness + thread depth
With plunged boss With collar
Faklig nærlýsing
| Anchor diameter | 10 mm |
| Anchor diameter x anchor length (l) | 10 x 15 mm |
| Anchor length (l) | 15 mm |
| Design | With collar |
| Drill hole depth (h 0) | 40 mm |
| Effective anchoring depth (h ef) | 40 mm |
| Material | Stainless steel A4 |
| Min. centre-to-centre distance (s min) | 100 mm |
| Min. edge clearance (c min) | 135 mm |
| Nominal drill-bit diameter (d 0) | 12 mm |
| Through-hole in the component to be connected (d f) | 12 mm |
| Torque during anchoring (T inst) | 15 Nm |
Væntað veiting: 29.–30. sep.
Bílegg í seinasta lagi mikudagin kl. 23:59 · bíleggingin verður send til Reca hósdagin
Hammerset anchor ES stainless steel A4, with collar M 10x40
For non-cracked concrete and for the multiple attachment of non-load-bearing systems to concrete The ES A4 hammerset anchor is an A4 stainless steel drop-in anchor for cotter-pin installation that is flush-mounted in concrete surfaces. The anchor is used to drive in the deformation-controlled cone. This expands the anchor to embed it securely in concrete with different compression strengths. The installed component can be removed and remounted without affecting load capacity.
| Vørunummar | 0904910040 |
| EAN | 4029484913350 |
| Pakkieind | pk (50 stk) |
| Anchor diameter | 10 mm |
| Anchor diameter x anchor length (l) | 10 x 15 mm |
| Anchor length (l) | 15 mm |
| Design | With collar |
| Drill hole depth (h 0) | 40 mm |
| Veitari | RECA NORM |