Vit dagføra vøruupplýsingarnar. Vit fara ígjøgnum allar vørulýsingarnar í vørusavninum. Upplýsingarnar um nýtsluøki og tilfar, sum vøran kann brúkast til, kunnu vera skeivar, meðan vit skráseta rætta tilfarið fyri hvørja vøru. Ert tú í iva, spyr tín kontaktpersón hjá A4.
- Stál
Suspended items in heating, sanitation and ventilation, anchoring with threaded rods and bolts, flat steel and profiled steel.
For non-cracked concrete and for attaching multiple non-load-bearing systems to cracked concrete The hammerset anchor E is a drop-in anchor for anchoring in concrete. The anchor is set into the drill hole in cotter-pin installation and reliably expanded using a manual or mechanical spreading tool and can be loaded straight away. The mounting can easily be loosened again. No need for installation torque.
Fyrimunir
- Approved for multiple attachment in cracked and non-cracked concrete
- Approved for multiple attachment in hollow pre-stressed concrete plate ceilings
- Approved for use as a single anchor for fixing in non-cracked concrete (anchoring depth ≥ 30 mm)
- Low drilling depth means a low risk of hitting reinforcements (anchoring depth 25 mm)
- Stop bit and SDS plus mechanical setting tool ensure fast, efficient and labour-saving assembly
- The marker setting tool makes visual installation checks easy
- Standard metric screws and threaded rods enable a wide range of applications
- FM approval for use in the installation of sprinkler systems (M10–M20)
- Suitable for use in the installation of sprinkler systems in accordance with the requirements of VdS Schadenverhütung GmbH (M8–M16)
- Fire-protection tested in concrete C20/25 to C50/60
Góð ráð
- Fire protection tested in concrete C20/25 to C50/60.
Faklig nærlýsing
| Anchor diameter | 16 mm |
| Anchor diameter x anchor length (l) | 16 x 65 mm |
| Anchor length (l) | 65 mm |
| Drill hole depth | 65 mm |
| Drill hole depth (h 0) | 65 mm |
| Drill hole depth (h 1) | 65 mm |
| Effective anchoring depth (h ef) | 65 mm |
| Female-thread length | 23 mm |
| Material | Steel |
| Min. centre-to-centre distance (s min) | 150 mm |
| Min. edge clearance (c min) | 200 mm |
| Min. required screw-in depth | 18 mm |
| Minimum component thickness (h min) | 160 mm |
| Nominal drill-bit diameter (d 0) | 20 mm |
| Outer diameter | 20 mm |
| Surface | Zinc plated |
| Thread diameter | 16 mm |
| Thread type | Metric thread |
| Through-hole in the component to be connected (d f) | 18 mm |
| Torque during anchoring (T inst) | 60 Nm |
Væntað veiting: 29.–30. sep.
Bílegg í seinasta lagi mikudagin kl. 23:59 · bíleggingin verður send til Reca hósdagin
Hammerset anchor E steel, zinc-plated, M 16x65
For non-cracked concrete and for attaching multiple non-load-bearing systems to cracked concrete The hammerset anchor E is a drop-in anchor for anchoring in concrete. The anchor is set into the drill hole in cotter-pin installation and reliably expanded using a manual or mechanical spreading tool and can be loaded straight away. The mounting can easily be loosened again. No need for installation torque.
| Vørunummar | 0904816 |
| EAN | 4029484147434 |
| Pakkieind | pk (25 stk) |
| Anchor diameter | 16 mm |
| Anchor diameter x anchor length (l) | 16 x 65 mm |
| Anchor length (l) | 65 mm |
| Drill hole depth | 65 mm |
| Drill hole depth (h 0) | 65 mm |
| Veitari | RECA NORM |
