Vit dagføra vøruupplýsingarnar. Vit fara ígjøgnum allar vørulýsingarnar í vørusavninum. Upplýsingarnar um nýtsluøki og tilfar, sum vøran kann brúkast til, kunnu vera skeivar, meðan vit skráseta rætta tilfarið fyri hvørja vøru. Ert tú í iva, spyr tín kontaktpersón hjá A4.
- Stál
- Rustfrítt stál
- Kopar
- Messing og bronsa
- Jarnfrítt metal
Shoulder-free matting, line matting, satin finish and removal of dirt and oxide layers on stainless steel, steel and non-ferrous base metals. Depending on the material used, it is possible to achieve a wide variety of matt and semi-gloss effects on steel, chrome steel, copper, brass, light metal and other materials.
Fyrimunir
- A better sanding effect is achieved by using additional abrasive cloth between the non-woven abrasive
- Mixed corundum made from corundum and synthetic corundum
- Synthetic resin-bonded flaps, attached radially to the axis
Góð ráð
- Please note: Pay attention to the direction of rotation!
- Tools are only suitable for clockwise rotation!
At high rotation speeds, a coarse grain acts like a finer grain and at low rotation speeds a fine grain acts like a coarser grain. Use tools with a low contact pressure; high contact pressure and sharp edges lead to premature wearing. If chip removal is insufficient, do not increase the contact pressure, but instead use a coarser grain.
Faklig nærlýsing
| Adapter diameter | 6 mm |
| Diameter | 50.0 mm |
| Grid size | 180/150 |
| Max. rotation speed | 11000 rpm |
| Recommended rotation speed | 6000 rpm |
| Width | 30.0 mm |
Væntað veiting: 10.–11. nov.
Bílegg í seinasta lagi mikudagin kl. 23:59 · bíleggingin verður send til Reca hósdagin
Flap wheel w/shaft combined abrasive cloth and non-woven material 50x30x6mm
Field of Application: Shoulder-free matting, line matting, satin finish and removal of dirt and oxide layers on stainless steel, steel and non-ferrous base metals. Depending on the material used, it is possible to achieve a wide variety of matt and semi-gloss effects on steel, chrome steel, copper, brass, light metal and other materials.
| Vørunummar | 0675150306 |
| EAN | 4029484298754 |
| Pakkieind | pk (5 stk) |
| Adapter diameter | 6 mm |
| Diameter | 50.0 mm |
| Grid size | 180/150 |
| Max. rotation speed | 11000 rpm |
| Recommended rotation speed | 6000 rpm |
| Veitari | RECA NORM |
