Vit dagføra vøruupplýsingarnar. Vit fara ígjøgnum allar vørulýsingarnar í vørusavninum. Upplýsingarnar um nýtsluøki og tilfar, sum vøran kann brúkast til, kunnu vera skeivar, meðan vit skráseta rætta tilfarið fyri hvørja vøru. Ert tú í iva, spyr tín kontaktpersón hjá A4.
The EPDM outer film is 1.2 mm thick and is used to seal the exterior bottom connections of doors and floor-level windows in outer walls and conservatories. It is also used to seal connections in roofs and balconies. The 0.75 mm thick version of the exterior EPDM film is ideal for the external sealing of construction elements in the façade area and for sealing underneath window sills.
The EPDM film is an elasticated elastomer membrane made of EPDM rubber with self-adhesive as a bonding and assembly aid. It is used for external sealing.
Fyrimunir
- Water-repellent yet permeable to water vapour
- Very good elasticity
- Outstanding resistance to UV and weathering
- Extreme temperature resistance
Góð ráð
- Application:
- The adhesive surfaces must be load-bearing and stable. The surfaces must be free from dust, release agents, oil, grease, moisture and ice.
- Cut the EPDM film to the desired length. The self-adhesive strip acts as an installation aid for fixing the EPDM film and should be bonded to the base material over its entire area. Glue the surfaces of the film and/or the base material to be bonded using EPDM film adhesive (art. no.: 0898 800 010) by applying the film adhesive to the base material in a bead of approx. 5 mm without interruption.
- Then press the EPDM film into the adhesive layer without applying any pressure and loosen it again if necessary so that the solvents can flash off from the adhesive on larger surfaces. Then glue the film to the designated base material and carefully press it using a press-on roller (art. no.: 0693 603 002).
- The adhesive properties of EPDM films may vary so it is always advisable to perform tests beforehand. Film overlaps must be at least 50 mm in width. If necessary, carry out further bonding to prevent the film from slipping.
- The EPDM film must always be installed without tension. The film is also mounted on the window with a clamping batten, socket rail or other fastening, as described in DIN 18195 (DIN 18531, requirement in accordance with DIN SPEC 20000-201 and DIN 18533, requirement in accordance with DIN SPEC 20000-202).
- EPDM films are not suitable for sealing against pressurised water and cannot be plastered or painted over. The film is generally compatible with bitumen substrates that are commonly used in construction.
With self-adhesive strips
Faklig nærlýsing
| Adhesive base | Acrylate |
| Building material class | B2 - Normally inflammable |
| Building material class conditions | in accordance with DIN 4102 |
| Building material class/conditions | B2 - Normally inflammable / in accordance with DIN 4102 |
| Building material compatibility | Conventional building materials |
| Chemical basis | Ethylene propylene diene natural rubber |
| Colour | Black |
| Conditions to maintain shelf life from production | Dry, at room temperature |
| Design | With self-adhesive strips |
| Length of roll | 25 m |
| Max. processing temperature | 35 °C |
| Max. temperature resistance | +130 °C |
| Min. processing temperature | 5 °C |
| Min. temperature resistance | -40 °C |
| Min./max. processing temperature | 5 to 35 °C |
| Min./max. temperature resistance | -40 to +130 °C |
| Shelf life from production/conditions | 18 Month / dry, at room temperature |
| Stretch capacity | 300 % |
| Thickness | 1.2 mm |
| Ultraviolet resistance | Yes |
| Water-vapour diffusion resistance factor value µ | 32000 |
| Width | 300 mm |
| Width x thickness | 300 x 1.2 mm |
Væntað veiting: 29.–30. sep.
Bílegg í seinasta lagi mikudagin kl. 23:59 · bíleggingin verður send til Reca hósdagin
EPDM film, external sealing, self-adhesive strip, 300x1.2 mm, length 25 m
The EPDM film is an elasticated elastomer membrane made of EPDM rubber with self-adhesive as a bonding and assembly aid. It is used for external sealing.
| Vørunummar | 0800620300 |
| EAN | 4066115429057 |
| Pakkieind | 1 stk |
| Adhesive base | Acrylate |
| Building material class | B2 - Normally inflammable |
| Building material class conditions | in accordance with DIN 4102 |
| Building material class/conditions | B2 - Normally inflammable / in accordance with DIN 4102 |
| Building material compatibility | Conventional building materials |
| Veitari | RECA NORM |
