Vit dagføra vøruupplýsingarnar. Vit fara ígjøgnum allar vørulýsingarnar í vørusavninum. Upplýsingarnar um nýtsluøki og tilfar, sum vøran kann brúkast til, kunnu vera skeivar, meðan vit skráseta rætta tilfarið fyri hvørja vøru. Ert tú í iva, spyr tín kontaktpersón hjá A4.
Suspended items in the heating, sanitary and ventilation sectors; suspended ceilings; other fastenings with threaded rods or screws. In C45/55 or B55; pretensioned
Anchor with internal thread in prestressed concrete hollow ceilings The Easy hollow-ceiling anchor with expansion cone and expansion sleeve is made from one piece and designed specifically for use in prestressed concrete hollow ceilings. When the screw or nut is tightened, the cone is released from the anchor sleeve and drawn into it. This spreads the anchor in the cavity and creates a mechanical interlock. The anchor can also be used in accordance with DIBt National technical approval Z-21.1-1785, if the expansion area is not in a hollow cavity.
Fyrimunir
- Free choice of fixing point due to secure function in both hollow cavities and solid concrete
- Flexible use with threaded rods and nuts or using hexagon head bolts
- Easy installation - no special tools required
- Immediate load-bearing capacity - no waiting
- High admissible loads
Faklig nærlýsing
| Anchor diameter | 10 mm |
| Anchor diameter x anchor length (l) | 10 x 53 mm |
| Anchor length (l) | 53 mm |
| Drill hole depth | 60 mm |
| Material | Steel |
| Nominal diameter | 10 mm |
| Nominal drill-bit diameter (d 0) | 16 mm |
| Required screw length (l s) | 55 mm + thickness of the add-on part (t fix) |
| Required stud-bolt length (l B) | 63 + thickness of the add-on part (t fix) |
| Sleeve length | 40 mm |
| Surface | Zinc plated |
| Thread type | Metric thread |
| Thread type x nominal diameter | M10 |
| Through-hole in the component to be connected (d f) | 12 mm |
| Torque during anchoring (T inst) | 30 Nm |
Væntað veiting: 29.–30. sep.
Bílegg í seinasta lagi mikudagin kl. 23:59 · bíleggingin verður send til Reca hósdagin
Easy hollow-ceiling anchor, galvanised steel, M10
Anchor with internal thread in prestressed concrete hollow ceilings The Easy hollow-ceiling anchor with expansion cone and expansion sleeve is made from one piece and designed specifically for use in prestressed concrete hollow ceilings. When the screw or nut is tightened, the cone is released from the anchor sleeve and drawn into it. This spreads the anchor in the cavity and creates a mechanical interlock. The anchor can also be used in accordance with DIBt National technical approval Z-21.1-1785, if the expansion area is not in a hollow cavity.
| Vørunummar | 090871040 |
| EAN | 4029484438839 |
| Pakkieind | pk (50 stk) |
| Anchor diameter | 10 mm |
| Anchor diameter x anchor length (l) | 10 x 53 mm |
| Anchor length (l) | 53 mm |
| Drill hole depth | 60 mm |
| Material | Steel |
| Veitari | RECA NORM |
