Vit dagføra vøruupplýsingarnar. Vit fara ígjøgnum allar vørulýsingarnar í vørusavninum. Upplýsingarnar um nýtsluøki og tilfar, sum vøran kann brúkast til, kunnu vera skeivar, meðan vit skráseta rætta tilfarið fyri hvørja vøru. Ert tú í iva, spyr tín kontaktpersón hjá A4.
Hexagon socket countersunk head screws Due to their head geometry, countersunk head screws have a limited load capacity according to this standard and may not meet the requirements for tensile or torsional strength. The actual mechanical properties of the screw are unchanged and comply with ISO 3506-1. Depending on the type, these items are supplied with threading almost up to the head. Countersinks for screw heads in accordance with DIN 7991 and ISO 10642 must comply with DIN 74 type F
Góð ráð
- DIN 7991 has been withdrawn and replaced by ISO 10642. There is some limited similarity (Some head heights and head diameters changed | Nominal diameter M18, M22, M24 removed | Stainless steels removed | Strength classes 10.9 and 12.9 added).
- Due to their head geometry, these screws can only be subjected to limited loads, see DIN EN ISO 3506-1
Faklig nærlýsing
| Compliant with REACH | Yes |
| Head diameter | 7.96 mm |
| Head height | 2.48 mm |
| Head type | Countersunk head |
| Internal drive | HS2.5 |
| ISO | 10642 |
| Length | 40 mm |
| Material | Stainless steel A2 |
| Nominal diameter | 4 mm |
| Pitch | 0.7 mm |
| RoHS-compliant | Yes |
| Standards | ISO 10642 |
| Thread length (metric thread) | 14 mm |
| Thread type | Metric thread |
| Thread type x nominal diameter | M4 |
| Width across flats | 2.5 mm |
Væntað veiting: 29.–30. sep.
Bílegg í seinasta lagi mikudagin kl. 23:59 · bíleggingin verður send til Reca hósdagin
Countersunk head screws, ISO 10642 A2-70, hexagon socket 2.5 M4 x 40
Hexagon socket countersunk head screws Due to their head geometry, countersunk head screws have a limited load capacity according to this standard and may not meet the requirements for tensile or torsional strength. The actual mechanical properties of the screw are unchanged and comply with ISO 3506-1. Depending on the type, these items are supplied with threading almost up to the head. Countersinks for screw heads in accordance with DIN 7991 and ISO 10642 must comply with DIN 74 type F
| Vørunummar | 01004 40 |
| EAN | 4029484291526 |
| Pakkieind | pk (100 stk) |
| Compliant with REACH | Yes |
| Head diameter | 7.96 mm |
| Head height | 2.48 mm |
| Head type | Countersunk head |
| Internal drive | HS2.5 |
| Veitari | RECA NORM |