Vit dagføra vøruupplýsingarnar. Vit fara ígjøgnum allar vørulýsingarnar í vørusavninum. Upplýsingarnar um nýtsluøki og tilfar, sum vøran kann brúkast til, kunnu vera skeivar, meðan vit skráseta rætta tilfarið fyri hvørja vøru. Ert tú í iva, spyr tín kontaktpersón hjá A4.
- Stál
- Træ
- Betong
For anchoring medium to heavy loads in cracked and uncracked concrete: Supports, steel beams, railing fastenings, cable conduits, pipe conduits, timber constructions, brackets, stadium seating, fastenings in earthquake regions and similar Load range: 2.4 kN-43.9 kN Concrete grade: C20/25-C50/60
For quick and reliable anchoring of medium to heavy loads in cracked and uncracked concrete The BZ plus A4 stud anchor is a torque-controlled anchor for quick in-place installation. When the hexagon nut is tightened, the stud is pulled into the expansion clip and clamps it effectively against the drill hole wall. The special coating on the hexagon nut effectively prevents cold welding to the bolt thread.
Fyrimunir
- High permissible loads, low spacing and edge distance
- NEW: BZ plus A4 70M12 with 33 % higher permissible tensile loads - for details, see European Technical Approval ETA-99/0010
- Quick and easy in-place installation
- Immediate load-bearing capacity - no waiting
- The special coating on the nut effectively prevents cold welding between nut and bolt thread.
- The plastic-covered cone guarantees subsequent expansion if cracks form in the concrete.
- Two effective anchorage depths for greater flexibility
Faklig nærlýsing
| Anchor diameter | 12 mm |
| Anchor diameter x anchor length (l) | 12 x 115 mm |
| Anchor length (l) | 115 mm |
| Drill hole depth (h 1) | 90 mm |
| Drill hole depth reduced (h 1, red) | 70 mm |
| Effective anchoring depth (h ef) | 70 mm |
| Effective anchoring depth reduced (h ef, red) | 50 mm |
| Embedding depth (h nom,red) | 60 mm |
| Embedding depth (h nom) | 80 mm |
| Material | Stainless steel A4 |
| Max. attachment height (t fix) | 20 mm |
| Max. attachment height reduced (t fix, red) | 40 mm |
| Minimum component thickness (h min) | 120 mm |
| Minimum component thickness for reduced anchoring depth (h m | 100 mm |
| Nominal drill-bit diameter (d 0) | 12 mm |
| Surface of the nut | Dark slide coating |
| Thread diameter | 12 mm |
| Thread diameter x thread length (metric thread) | 12 x 56 mm |
| Thread length (metric thread) | 56 mm |
| Through-hole in the component to be connected (d f) | 14 mm |
| Torque during anchoring (T inst) | 50 Nm |
| Width across flats | 19 mm |
Væntað veiting: 29.–30. sep.
Bílegg í seinasta lagi mikudagin kl. 23:59 · bíleggingin verður send til Reca hósdagin
BZ plus stud anchor A4 M12 x 20-40/115
For quick and reliable anchoring of medium to heavy loads in cracked and uncracked concrete The BZ plus A4 stud anchor is a torque-controlled anchor for quick in-place installation. When the hexagon nut is tightened, the stud is pulled into the expansion clip and clamps it effectively against the drill hole wall. The special coating on the hexagon nut effectively prevents cold welding to the bolt thread.
| Vørunummar | 0910512115 |
| EAN | 4029484741854 |
| Pakkieind | pk (25 stk) |
| Anchor diameter | 12 mm |
| Anchor diameter x anchor length (l) | 12 x 115 mm |
| Anchor length (l) | 115 mm |
| Drill hole depth (h 1) | 90 mm |
| Drill hole depth reduced (h 1, red) | 70 mm |
| Veitari | RECA NORM |
