Vit dagføra vøruupplýsingarnar. Vit fara ígjøgnum allar vørulýsingarnar í vørusavninum. Upplýsingarnar um nýtsluøki og tilfar, sum vøran kann brúkast til, kunnu vera skeivar, meðan vit skráseta rætta tilfarið fyri hvørja vøru. Ert tú í iva, spyr tín kontaktpersón hjá A4.
- Træ
Versatile areas of application: For example, the FDB BG1 sealing tape can be used for external sealing in window and door installation, in metal, wood and container construction, or for sealing expansion joints, prefabricated elements and dividers.
Seals stressed primary and cross joints in facade and window construction. The FDB BG1 sealing tape is a high-quality, waterproofed and pre-compressed foam tape for driving rain-resistant, exterior sealing of connection joints in building construction. The solvent-free, single-sided self-adhesive is a simple assembly aid. With the FDB BG1 sealing tape, construction joints remain perfectly sealed over the long-term.
Fyrimunir
- Very good sealing properties in accordance with BG1 - resistant to driving rain ≥ 600 Pa
- Water-resistant but still water vapour permeable
- Vapour-permeable - allows good moisture regulation and drying out in the joint
- Driving-rain-resistant bridging of uneven surfaces in the joint in the respective application areas
- The high tolerance capacity of the tapes compensates structural movement and common construction tolerances
- Offers maximum protection against indoor air pollution - certified according to GEV-EMICODE® EC1plus - very low emissions
- Very good environmental compatibility - without halogenated flame retardants, solvent-free and produced without the use of (H)CFCs/CFCs
- Can be plastered or painted over
- Tested UV resistance
- Large selection of different sizes in two colours
Góð ráð
- Tape expansion is accelerated at high temperatures and slowed down at low temperatures. At low temperatures (<10 °C), store the tape at room temperature for at least six hours.
- The FDB BG1 sealing tape cannot be used with standing water.
- The tape must not come into contact with aggressive chemicals containing solvents.
- Weigh down the remaining rolls in open boxes to prevent the rolls from shifting sideways (telescoping).
20 rolls of 10 m = 200 m
Faklig nærlýsing
| Adhesive base | Acrylate |
| Backing material | PUR foam |
| Building material class | B1 - Of low flammability |
| Building material class conditions | in accordance with DIN 4102 |
| Building material class/conditions | B1 - Of low flammability / in accordance with DIN 4102 |
| Building material compatibility | Conventional building materials |
| Chemical basis | Fine open-cell polyurethane foam |
| Colour of tape | Grey |
| Composition of set | 20 rolls of 10 m = 200 m |
| Condition for maintaining watertightness in driving rain | in accordance with DIN 18542-BG1 |
| Conditions to maintain shelf life from production | at 1°C to 20°C |
| Heat conductance λ | 0.0412 W/(m*K) |
| Heat conductance λ / conditions | 0.0412 W/(m*K) / in accordance with DIN EN 12667 |
| Heat conductance λ conditions | in accordance with DIN EN 12667 |
| Length of roll | 10 m |
| Max. air layer thickness equivalent to water-vapour diffusio | 0.5 m |
| Max. joint width | 4 mm |
| Max. processing temperature | 25 °C |
| Max. temperature resistance | +100 °C |
| Min. joint width | 2 mm |
| Min. processing temperature | 5 °C |
| Min. resistance against driving rain (pressure) | 600 Pa |
| Min. resistance against driving rain (pressure)/conditions | 600 Pa / in accordance with DIN 18542-BG1 |
| Min. temperature resistance | -30 °C |
| Min./max. joint width | 2-4 mm |
| Min./max. processing temperature | 5 to 25 °C |
| Min./max. temperature resistance | -30 to +100 °C |
| Roll width | 15 mm |
| Shelf life | 24 Month |
| Shelf life from production/conditions | 24 Month / at 1°C to 20°C |
| Stress group | BG 1 |
| Ultraviolet resistance | Yes, when installed to be resistant to driving rain |
Væntað veiting: 29.–30. sep.
Bílegg í seinasta lagi mikudagin kl. 23:59 · bíleggingin verður send til Reca hósdagin
BG1 sealing tape, grey, width 15 mm, joint width 2-4 mm, length 10 m
Seals stressed primary and cross joints in facade and window construction. The FDB BG1 sealing tape is a high-quality, waterproofed and pre-compressed foam tape for driving rain-resistant, exterior sealing of connection joints in building construction. The solvent-free, single-sided self-adhesive is a simple assembly aid. With the FDB BG1 sealing tape, construction joints remain perfectly sealed over the long-term.
20 stk í kartong
| Vørunummar | 0800315222 |
| EAN | 4066115489556 |
| Pakkieind | pk (20 stk) |
| Adhesive base | Acrylate |
| Backing material | PUR foam |
| Building material class | B1 - Of low flammability |
| Building material class conditions | in accordance with DIN 4102 |
| Building material class/conditions | B1 - Of low flammability / in accordance with DIN 4102 |
| Veitari | RECA NORM |
