Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
- Concrete
For anchoring: • Lifting rails • Conveyors or crane systems • Robots • Slewing cranes • Heavy machinery • Fans • Noise control barriers • etc. in cracked and non-cracked standard concrete with strength classes C20/25 and C50/60.
For use in dry indoor areas The VMZ dynamic injection system is a bonded expansion anchor for dynamic loads, consisting of a VMZ composite mortar and a special anchor rod with nut and washer. Using an application gun, both components of the VMZ composite mortar are injected into the drill hole via a mixer nozzle and the anchor rods are inserted manually. The load is transferred via the mechanical interlocking of individual anchor rod cones in the mortar and also via a combination of retention and frictional forces in the concrete.
Advantages
- Approved for general construction for static, predominantly static and dynamic loads in cracked and uncracked normal weight concrete with strength classes C20/25 and C50/60
- High load capacities for safe option
- Maximum dynamic load-bearing capacity when separating static and non-static loads and when taking actual vibration frequency into account
- Usual processing with conventional VMZ chemical injection mortar (may only be processed with this system in accordance with the approval) and quick setting thanks to through-setting installation
- Instant installation checks possible if excess mortar escapes
- Version for pre-positioned installation or combination version deliverable on request
- A4 and HCR version deliverable on request
Advice
- Lifting rails
- Conveyors or crane systems
- Robots
- Slewing cranes
- Heavy machinery
- Fans
- Noise control barriers
- etc.
Technical specifications
| Anchor diameter | 12 mm |
| Anchor diameter x anchor length (l) | 12 x 160 mm |
| Anchor length (l) | 160 mm |
| Drill hole depth (h 1) | 105 mm |
| Length | 160 mm |
| Material | Steel |
| Nominal drill-bit diameter (d 0) | 14 mm |
| Required injection mortar | VMZ 330 |
| Surface | Zinc plated |
| Thread diameter (metric thread) | 12 mm |
| Thread type | Metric thread |
| Torque during anchoring (T inst) | 30 Nm |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
VMZ-A dyn anchor rods, galv. steel, max. clamp. length: 25 mm, 100 M12 x 25/155
For use in dry indoor areas The VMZ dynamic injection system is a bonded expansion anchor for dynamic loads, consisting of a VMZ composite mortar and a special anchor rod with nut and washer. Using an application gun, both components of the VMZ composite mortar are injected into the drill hole via a mixer nozzle and the anchor rods are inserted manually. The load is transferred via the mechanical interlocking of individual anchor rod cones in the mortar and also via a combination of retention and frictional forces in the concrete.
| Article number | 0914612155 |
| EAN | 4029484463992 |
| Pack unit | pk (10 pcs) |
| Anchor diameter | 12 mm |
| Anchor diameter x anchor length (l) | 12 x 160 mm |
| Anchor length (l) | 160 mm |
| Drill hole depth (h 1) | 105 mm |
| Length | 160 mm |
| Supplier | RECA NORM |
