1 / 12
Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
Application area
Materials
- Wood
- Plastics
- Concrete
For securing substructures made of wood, metal or plastic on autoclaved aerated concrete. Suitable materials: Autoclaved aerated concrete strength class ≥ PP2
Description
For securing components to autoclaved aerated concrete
Advantages
- Simple, quick mounting
- Small drill hole diameter
- The screw cuts the thread into the base material itself
- Immediate load-bearing capacity - no waiting
- Attachment can be fully removed again
- Stylish look with countersunk hexagon head
Advice
- Always comply with drill hole depth and drill hole diameter.
- When using a screwdriver (cordless or 220 V), an attempt at screwing in must be made before using the tool, as the strength of shaped brick and ceiling panels can vary greatly.
- The friction clutch on the screwdriver must be triggered as soon as the screw head is flush with the relevant component to be secured.
- Apply the relevant tightening torque using a torque wrench.
- Do not use an impact screwdriver!
- Detailed installation instructions are included.
Technical specifications
| Anchor diameter | 8 mm |
| Anchor diameter x anchor length (l) | 8 x 110 mm |
| Anchor length (l) | 110 mm |
| Drill hole depth (h 1) | 40 mm |
| Embedding depth (h nom) | 80 mm |
| Head type | Countersunk milling head |
| Internal drive | TX25 |
| Material | Steel |
| Max. attachment height (t fix) | 30 mm |
| Nominal drill-bit diameter (d 0) | 4 mm |
| Recommended tensile load | 0.3 kN |
| Surface | Zinc plated |
| Through-hole in the component to be connected (d f) | 8 mm |
| Tightening torque (T inst) | 4 Nm |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
TSM-PB 8 aerated concrete screw, galv. steel, countersunk head, TX 25 8 x 110 mm
For securing components to autoclaved aerated concrete
| Article number | 0902408011 |
| EAN | 4029484757138 |
| Pack unit | pk (100 pcs) |
| Anchor diameter | 8 mm |
| Anchor diameter x anchor length (l) | 8 x 110 mm |
| Anchor length (l) | 110 mm |
| Drill hole depth (h 1) | 40 mm |
| Embedding depth (h nom) | 80 mm |
| Supplier | RECA NORM |
