Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
Field of Application
For use outdoors or in wet rooms if there are no particularly aggressive conditions present.
Advantages
- Only one threaded rod required for different clamping thicknesses as the rod can be adjusted as needed
- Can also be used for large clamping thicknesses, for example those found in heat insulation
- Threaded rods, length 1 m, for cutting
- Includes an acceptance test certificate 3.1 EN 10204 in each pack (proof of strength)
Advice
- The use of standard threaded rods, washers and nuts is permissible when using the VMU injection system in masonry or in uncracked concrete if the following requirements are met:
- Material, dimensions and mechanical properties correspond to the specifications of the relevant approvals.
- Evidence of material and mechanical features of steel parts by acceptance test certificate 3.1 in line with EN 10204:2004; the certificates must be retained.
- The threaded rods must be marked with the required effective anchorage depth.
- Compliance with further requirements of the particular approval.
- If using these threaded rods in other injection systems, the requirements of the respective approval must be fulfilled.
- A4 stainless steel (specially coated hexagon nut)
Content remark
including acceptance test certificate 3.1
Technical specifications
| Anchor diameter | 10 mm |
| Anchor diameter x anchor length (l) | 10 x 1000 mm |
| Anchor length (l) | 1000 mm |
| DIN | 976-1 |
| Length | 1000 mm |
| Material | Stainless steel A4 |
| Nominal diameter | 10 mm |
| Nominal drill-bit diameter (d 0) | 12 mm |
| Required injection mortar | VMU plus polar 330 |
| Standards | DIN 976-1 |
| Suitable for non-cracked concrete | Yes |
| Suitable for perforated brick | Yes |
| Suitable for solid brick | Yes |
| Thread diameter (metric thread) | 10 mm |
| Thread length (metric thread) | 1000 mm |
| Thread type | Metric thread |
| Thread type x nominal diameter x length | M10 x 1000 mm |
| Through-hole in the component to be connected (d f) | 12 mm |
| Torque during anchoring (T inst) | 2 |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
Threaded rod, 3.1 VM-A DIN 976-1 A4-70, for composite mortar systems M10x1,000
Field of Application: For use outdoors or in wet rooms if there are no particularly aggressive conditions present.
| Article number | 091180410 |
| EAN | 4029484500208 |
| Pack unit | pk (10 pcs) |
| Anchor diameter | 10 mm |
| Anchor diameter x anchor length (l) | 10 x 1000 mm |
| Anchor length (l) | 1000 mm |
| DIN | 976-1 |
| Length | 1000 mm |
| Supplier | RECA NORM |
