For non-cracked concrete and for attaching multiple non-load-bearing systems to cracked concrete

The hammerset anchor E is a drop-in anchor for anchoring in concrete.

The anchor is set into the drill hole in cotter-pin installation and reliably expanded using a manual or mechanical spreading tool and can be loaded straight away. The mounting can easily be loosened again.

No need for installation torque.

Application area:

Suspended items in heating, sanitation and ventilation, anchoring with threaded rods and bolts, flat steel and profiled steel.

Advantages:

• Approved for multiple attachment in cracked and non-cracked concrete
• Approved for multiple attachment in hollow pre-stressed concrete plate ceilings
• Approved for use as a single anchor for fixing in non-cracked concrete (anchoring depth ≥ 30 mm)
• Low drilling depth means a low risk of hitting reinforcements (anchoring depth 25 mm)
• Stop bit and SDS plus mechanical setting tool ensure fast, efficient and labour-saving assembly
• The marker setting tool makes visual installation checks easy
• Standard metric screws and threaded rods enable a wide range of applications
• FM approval for use in the installation of sprinkler systems (M10–M20)
• Suitable for use in the installation of sprinkler systems in accordance with the requirements of VdS Schadenverhütung GmbH (M8–M16)
• Fire-protection tested in concrete C20/25 to C50/60

Advice:

Fire protection tested in concrete C20/25 to C50/60.