Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
- Steel
Suspended items in heating, sanitation and ventilation, anchoring with threaded rods and bolts, flat steel and profiled steel.
For non-cracked concrete and for attaching multiple non-load-bearing systems to cracked concrete The hammerset anchor E is a drop-in anchor for anchoring in concrete. The anchor is set into the drill hole in cotter-pin installation and reliably expanded using a manual or mechanical spreading tool and can be loaded straight away. The mounting can easily be loosened again. No need for installation torque.
Advantages
- Approved for multiple attachment in cracked and non-cracked concrete
- Approved for multiple attachment in hollow pre-stressed concrete plate ceilings
- Approved for use as a single anchor for fixing in non-cracked concrete (anchoring depth ≥ 30 mm)
- Low drilling depth means a low risk of hitting reinforcements (anchoring depth 25 mm)
- Stop bit and SDS plus mechanical setting tool ensure fast, efficient and labour-saving assembly
- The marker setting tool makes visual installation checks easy
- Standard metric screws and threaded rods enable a wide range of applications
- FM approval for use in the installation of sprinkler systems (M10–M20)
- Suitable for use in the installation of sprinkler systems in accordance with the requirements of VdS Schadenverhütung GmbH (M8–M16)
- Fire-protection tested in concrete C20/25 to C50/60
Advice
- Fire protection tested in concrete C20/25 to C50/60.
Technical specifications
| Anchor diameter | 16 mm |
| Anchor diameter x anchor length (l) | 16 x 65 mm |
| Anchor length (l) | 65 mm |
| Drill hole depth | 65 mm |
| Drill hole depth (h 0) | 65 mm |
| Drill hole depth (h 1) | 65 mm |
| Effective anchoring depth (h ef) | 65 mm |
| Female-thread length | 23 mm |
| Material | Steel |
| Min. centre-to-centre distance (s min) | 150 mm |
| Min. edge clearance (c min) | 200 mm |
| Min. required screw-in depth | 18 mm |
| Minimum component thickness (h min) | 160 mm |
| Nominal drill-bit diameter (d 0) | 20 mm |
| Outer diameter | 20 mm |
| Surface | Zinc plated |
| Thread diameter | 16 mm |
| Thread type | Metric thread |
| Through-hole in the component to be connected (d f) | 18 mm |
| Torque during anchoring (T inst) | 60 Nm |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
Hammerset anchor E steel, zinc-plated, M 16x65
For non-cracked concrete and for attaching multiple non-load-bearing systems to cracked concrete The hammerset anchor E is a drop-in anchor for anchoring in concrete. The anchor is set into the drill hole in cotter-pin installation and reliably expanded using a manual or mechanical spreading tool and can be loaded straight away. The mounting can easily be loosened again. No need for installation torque.
| Article number | 0904816 |
| EAN | 4029484147434 |
| Pack unit | pk (25 pcs) |
| Anchor diameter | 16 mm |
| Anchor diameter x anchor length (l) | 16 x 65 mm |
| Anchor length (l) | 65 mm |
| Drill hole depth | 65 mm |
| Drill hole depth (h 0) | 65 mm |
| Supplier | RECA NORM |
