Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
- Steel
- Stainless steel
- Non-ferrous metal
Finish on stainless steel, steel and non-ferrous base metals. For removing oxides and discolouration. Produces a highly uniform surface with a high sheen.
Advantages
- Very gentle working
Advice
- Please note: Pay attention to the direction of rotation!
- Tools are only suitable for clockwise rotation!
At high rotation speeds, a coarse grain acts like a finer grain and at low rotation speeds a fine grain acts like a coarser grain. Use tools with a low contact pressure; high contact pressure and sharp edges lead to premature wearing. If chip removal is insufficient, do not increase the contact pressure, but instead use a coarser grain.
Technical specifications
| Adapter diameter | 6 mm |
| Diameter | 60.0 mm |
| Fleece grid size | 180 |
| Max. rotation speed | 9000 rpm |
| Recommended rotation speed | 5000 rpm |
| Width | 40.0 mm |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
Flap wheel with shaft, abrasive fleece, grain 180 60 x 40 x 6 mm
Field of Application: Finish on stainless steel, steel and non-ferrous base metals. For removing oxides and discolouration. Produces a highly uniform surface with a high sheen.
| Article number | 0675260406 |
| EAN | 4029484298808 |
| Pack unit | pk (5 pcs) |
| Adapter diameter | 6 mm |
| Diameter | 60.0 mm |
| Fleece grid size | 180 |
| Max. rotation speed | 9000 rpm |
| Recommended rotation speed | 5000 rpm |
| Supplier | RECA NORM |
