Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
- Steel
- Stainless steel
- Copper
- Brass and bronze
- Non-ferrous metal
Shoulder-free matting, line matting, satin finish and removal of dirt and oxide layers on stainless steel, steel and non-ferrous base metals. Depending on the material used, it is possible to achieve a wide variety of matt and semi-gloss effects on steel, chrome steel, copper, brass, light metal and other materials.
Advantages
- A better sanding effect is achieved by using additional abrasive cloth between the non-woven abrasive
- Mixed corundum made from corundum and synthetic corundum
- Synthetic resin-bonded flaps, attached radially to the axis
Advice
- Please note: Pay attention to the direction of rotation!
- Tools are only suitable for clockwise rotation!
At high rotation speeds, a coarse grain acts like a finer grain and at low rotation speeds a fine grain acts like a coarser grain. Use tools with a low contact pressure; high contact pressure and sharp edges lead to premature wearing. If chip removal is insufficient, do not increase the contact pressure, but instead use a coarser grain.
Technical specifications
| Adapter diameter | 6 mm |
| Diameter | 60.0 mm |
| Grid size | 180/150 |
| Max. rotation speed | 9000 rpm |
| Recommended rotation speed | 5000 rpm |
| Width | 40.0 mm |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
Flap wheel w/shaft combined abrasive cloth and non-woven material 60x40x6mm
Field of Application: Shoulder-free matting, line matting, satin finish and removal of dirt and oxide layers on stainless steel, steel and non-ferrous base metals. Depending on the material used, it is possible to achieve a wide variety of matt and semi-gloss effects on steel, chrome steel, copper, brass, light metal and other materials.
| Article number | 0675160406 |
| EAN | 4029484298761 |
| Pack unit | pk (5 pcs) |
| Adapter diameter | 6 mm |
| Diameter | 60.0 mm |
| Grid size | 180/150 |
| Max. rotation speed | 9000 rpm |
| Recommended rotation speed | 5000 rpm |
| Supplier | RECA NORM |
