Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
- Wood
- Concrete
- Masonry and brick
- Tiles and ceramics
The FDB BG2 sealing tape is versatile: It is suitable in window construction for connection joints that are resistant to driving rain, thermal seals between the window frame and masonry, for backfilling, profile couplings and for battening. In façade construction, it can be used as an overlay for in-situ concrete or concrete elements and in interior finishing to decouple raised floors. In roofing and timber construction, it can be used to seal roof tiles, skylights, ridges/crests/grooves and dormers.
Ideal for indirect exposure to weathering The FDB BG2 sealing tape is a waterproofed, pre-compressed foam tape, equipped with a self-adhesive strip as an assembly aid. It is ideally suited for sealing against wind and rain in case of indirect exposure to weathering and for avoiding heat losses in accordance with the specifications of the Energy Saving Ordinance and RAL Quality Assurance Association.
Advantages
- Tested tape quality in accordance with BG2 - resistant to driving rain up to 300 Pa
- Bridges uneven surfaces and joints
- Offers maximum protection against indoor air pollution - certified in accordance with GEV-EMICODE® EC1PLUS - very low emissions
- Structural movement and common construction tolerances are compensated due to the high tolerance capacity of the tapes
- Stress group 2 in accordance with EN 18542
- Can also be used as a thermal insulation tape depending on the joint width and depth
Advice
- Do not subject the FDB BG2 sealing tape to direct weathering.
- The tape must not come into contact with aggressive chemicals containing solvents.
- The FDB BG2 sealing tape cannot be used with standing water.
Technical specifications
| Adhesive base | Acrylate |
| Backing material | PUR foam |
| Building material class | E - Normally inflammable |
| Building material class conditions | in accordance with DIN EN 13501 |
| Building material class/conditions | E - Normally inflammable / in accordance with DIN EN 13501 |
| Building material compatibility | Conventional building materials |
| Chemical basis | Fine open-cell polyurethane foam |
| Colour of tape | Grey |
| Condition for maintaining watertightness in driving rain | in accordance with DIN EN 1027 |
| Conditions to maintain shelf life from production | at room temperature, in the original container |
| Heat conductance λ | 0.0396 W/(m*K) |
| Heat conductance λ / conditions | 0.0396 W/(m*K) / in accordance with DIN EN 12667 |
| Heat conductance λ conditions | in accordance with DIN EN 12667 |
| Length of roll | 6 m |
| Max. air layer thickness equivalent to water-vapour diffusio | 0.5 m |
| Max. joint width | 7 mm |
| Max. temperature resistance | 100 °C |
| Min. joint width | 3 mm |
| Min. processing temperature | 5 °C |
| Min. resistance against driving rain (pressure) | 300 Pa |
| Min. resistance against driving rain (pressure)/conditions | 300 Pa / in accordance with DIN EN 1027 |
| Min. temperature resistance | -30 °C |
| Min./max. joint width | 3-7 mm |
| Min./max. temperature resistance | -30 to 100 °C |
| Roll width | 10 mm |
| Shelf life from production/conditions | 18 Month / at room temperature, in the original container |
| Stress group | BG 2 and BG R |
| Ultraviolet resistance | No, with outdoor weathering |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
BG2 sealing tape, grey, width 10 mm, joint width 3-7 mm, length 6 m
Ideal for indirect exposure to weathering The FDB BG2 sealing tape is a waterproofed, pre-compressed foam tape, equipped with a self-adhesive strip as an assembly aid. It is ideally suited for sealing against wind and rain in case of indirect exposure to weathering and for avoiding heat losses in accordance with the specifications of the Energy Saving Ordinance and RAL Quality Assurance Association.
| Article number | 0800410223 |
| EAN | 4066115429545 |
| Pack unit | pk (30 pcs) |
| Adhesive base | Acrylate |
| Backing material | PUR foam |
| Building material class | E - Normally inflammable |
| Building material class conditions | in accordance with DIN EN 13501 |
| Building material class/conditions | E - Normally inflammable / in accordance with DIN EN 13501 |
| Supplier | RECA NORM |
