Opdaterede produktoplysninger. Vi gennemgår alle beskrivelser i kataloget. Anvendelsesområde og de anførte materialer kan være forkerte, mens vi fastlægger de korrekte materialer for alle artikler. Er du i tvivl, så spørg din kontaktperson hos A4.
Field of Application
For use outdoors or in wet rooms if there are no particularly aggressive conditions present.
Fordele
- Only one threaded rod required for different clamping thicknesses as the rod can be adjusted as needed
- Can also be used for large clamping thicknesses, for example those found in heat insulation
- Threaded rods, length 1 m, for cutting
- Includes an acceptance test certificate 3.1 EN 10204 in each pack (proof of strength)
Gode råd
- The use of standard threaded rods, washers and nuts is permissible when using the VMU injection system in masonry or in uncracked concrete if the following requirements are met:
- Material, dimensions and mechanical properties correspond to the specifications of the relevant approvals.
- Evidence of material and mechanical features of steel parts by acceptance test certificate 3.1 in line with EN 10204:2004; the certificates must be retained.
- The threaded rods must be marked with the required effective anchorage depth.
- Compliance with further requirements of the particular approval.
- If using these threaded rods in other injection systems, the requirements of the respective approval must be fulfilled.
- A4 stainless steel (specially coated hexagon nut)
Content remark
including acceptance test certificate 3.1
Tekniske specifikationer
| Anchor diameter | 10 mm |
| Anchor diameter x anchor length (l) | 10 x 1000 mm |
| Anchor length (l) | 1000 mm |
| DIN | 976-1 |
| Length | 1000 mm |
| Material | Stainless steel A4 |
| Nominal diameter | 10 mm |
| Nominal drill-bit diameter (d 0) | 12 mm |
| Required injection mortar | VMU plus polar 330 |
| Standards | DIN 976-1 |
| Suitable for non-cracked concrete | Yes |
| Suitable for perforated brick | Yes |
| Suitable for solid brick | Yes |
| Thread diameter (metric thread) | 10 mm |
| Thread length (metric thread) | 1000 mm |
| Thread type | Metric thread |
| Thread type x nominal diameter x length | M10 x 1000 mm |
| Through-hole in the component to be connected (d f) | 12 mm |
| Torque during anchoring (T inst) | 2 |
Forventet levering: 29.–30. sep.
Bestil senest onsdag kl. 23:59 · bestillingen sendes til Reca torsdag
Threaded rod, 3.1 VM-A DIN 976-1 A4-70, for composite mortar systems M10x1,000
Field of Application: For use outdoors or in wet rooms if there are no particularly aggressive conditions present.
| Artikelnummer | 091180410 |
| EAN | 4029484500208 |
| Pakkeenhed | pk (10 stk) |
| Anchor diameter | 10 mm |
| Anchor diameter x anchor length (l) | 10 x 1000 mm |
| Anchor length (l) | 1000 mm |
| DIN | 976-1 |
| Length | 1000 mm |
| Leverandør | RECA NORM |
