Fordele

• Only one threaded rod required for different clamping thicknesses as the rod can be adjusted as needed
• Can also be used for large clamping thicknesses, for example those found in heat insulation
• Threaded rods, length 1 m, for cutting
• Includes an acceptance test certificate 3.1 EN 10204 in each pack (proof of strength)

Gode råd

• The use of standard threaded rods, washers and nuts is permissible when using the VMU injection system in masonry or in uncracked concrete if the following requirements are met:
• Material, dimensions and mechanical properties correspond to the specifications of the relevant approvals.
• Evidence of material and mechanical features of steel parts by acceptance test certificate 3.1 in line with EN 10204:2004; the certificates must be retained.
• The threaded rods must be marked with the required effective anchorage depth.
• Compliance with further requirements of the particular approval.
• If using these threaded rods in other injection systems, the requirements of the respective approval must be fulfilled.
• * With DIBt National technical approval

Tekniske specifikationer