1 / 7

Opdaterede produktoplysninger. Vi gennemgår alle beskrivelser i kataloget. Anvendelsesområde og de anførte materialer kan være forkerte, mens vi fastlægger de korrekte materialer for alle artikler. Er du i tvivl, så spørg din kontaktperson hos A4.

Application area

Materialer

Beton

For attaching diamond drills and saw blades to concrete

Beskrivelse

Ideal for attaching diamond drills and saw blades to concrete

Fordele

Solid wall plug body with 16 mm external diameter
Very heavy load due to large steel cross-section
Hammerset anchor with increased steel failure load
Greater safety margins when anchoring core drills
For recommended loads, see EM 12 hammerset anchor (permissible loads)
For use with expander tool E-SW 12

Gode råd

It is essential to observe drill hole depth and drill hole diameter
Drive the cone in using the expander tool until the setting tool makes contact with the wall plug body
Minimum screw length = component thickness + minimum screw-in depth
Maximum screw length = component thickness + thread depth.

Tekniske specifikationer

Anchor diameter	16 mm
Anchor diameter x anchor length (l)	16 x 54 mm
Anchor length (l)	54 mm
Diameter	16 mm
Drill hole depth	50 mm
Drill hole diameter	16 mm
Female-thread length	18 mm
Length	54.0 mm

Material	Steel
Min. centre-to-centre distance (s min)	120 mm
Min. edge clearance (c min)	165 mm
Min. required screw-in depth	13 mm
Nominal drill-bit diameter (d 0)	16 mm
Surface	Zinc plated
Thread type	Metric thread

Forventet levering: 29.–30. sep.

Bestil senest onsdag kl. 23:59 · bestillingen sendes til Reca torsdag

Hammerset anchor ED stainless steel, zinc-plated, M 12x50 D

Ideal for attaching diamond drills and saw blades to concrete

Artikelnummer	090481216
EAN	4029484432721
Pakkeenhed	pk (50 stk)
Anchor diameter	16 mm
Anchor diameter x anchor length (l)	16 x 54 mm
Anchor length (l)	54 mm
Diameter	16 mm
Drill hole depth	50 mm
Leverandør	RECA NORM