Opdaterede produktoplysninger. Vi gennemgår alle beskrivelser i kataloget. Anvendelsesområde og de anførte materialer kan være forkerte, mens vi fastlægger de korrekte materialer for alle artikler. Er du i tvivl, så spørg din kontaktperson hos A4.
- Stål
- Beton
For securing Suspended items in heating, sanitation and ventilation, anchoring with threaded rods and bolts, flat steel, profiled steel in concrete with a strength class ≥ C20/25 and ≤ C50/60. Load range: 1.2 kN–28.6 kN.
For the multiple attachment of non-load-bearing systems in cracked and non-cracked concrete The hammerset anchor E is a drop-in anchor for anchoring in concrete. The anchor is set into the drill hole in cotter-pin installation and reliably expanded using a manual or mechanical spreading tool and can be loaded straight away. The mounting can easily be loosened again. No need for installation torque.
Fordele
- Small drill hole depth, high load-bearing capacity
- Permitted as single anchors for fixing in non-cracked concrete, with an anchoring depth ≥ 30 mm
- Labour-saving and quick assembly through stop bit and attachable tool
- Immediate load-bearing capacity - no waiting
- Fixings can be removed from the flush-mounted anchor
Gode råd
- Fire protection tested in concrete C20/25 to C50/60.
With plunged boss With collar
Tekniske specifikationer
| Anchor diameter | 12 mm |
| Anchor diameter x anchor length (l) | 12 x 18 mm |
| Anchor length (l) | 18 mm |
| Design | With collar |
| Drill hole depth (h 0) | 50 mm |
| Effective anchoring depth (h ef) | 50 mm |
| Material | Steel |
| Min. centre-to-centre distance (s min) | 120 mm |
| Min. edge clearance (c min) | 165 mm |
| Nominal drill-bit diameter (d 0) | 15 mm |
| Surface | Zinc plated |
| Through-hole in the component to be connected (d f) | 14 mm |
| Torque during anchoring (T inst) | 35 Nm |
Forventet levering: 29.–30. sep.
Bestil senest onsdag kl. 23:59 · bestillingen sendes til Reca torsdag
Hammerset anchor ES steel, zinc-plated, with collar M 12x50
For the multiple attachment of non-load-bearing systems in cracked and non-cracked concrete The hammerset anchor E is a drop-in anchor for anchoring in concrete. The anchor is set into the drill hole in cotter-pin installation and reliably expanded using a manual or mechanical spreading tool and can be loaded straight away. The mounting can easily be loosened again. No need for installation torque.
| Artikelnummer | 0904812050 |
| EAN | 4029484913503 |
| Pakkeenhed | pk (50 stk) |
| Anchor diameter | 12 mm |
| Anchor diameter x anchor length (l) | 12 x 18 mm |
| Anchor length (l) | 18 mm |
| Design | With collar |
| Drill hole depth (h 0) | 50 mm |
| Leverandør | RECA NORM |