Opdaterede produktoplysninger. Vi gennemgår alle beskrivelser i kataloget. Anvendelsesområde og de anførte materialer kan være forkerte, mens vi fastlægger de korrekte materialer for alle artikler. Er du i tvivl, så spørg din kontaktperson hos A4.

Field of Application

arecal Weldspray is an aqueous release agent for welding technology. It prevents weld spatter from burning on to torch heads, workpieces and robots, and considerably increases the torch service life.

Beskrivelse

arecal welding release agent is a silicone-free, aqueous release agent for welding technology based on highly effective water-soluble substances.

Fordele

Silicone-free and non-flammable.
Easily painted over after cleaning.

Gode råd

Clean workpieces of any residues and spray surfaces lightly and evenly along the future welding seam.
For MIG welding, spray the nozzle and the jacket with a thin layer of the product from time to time with the device switched off, so that weld spatter cannot stick.
When spraying, please also observe the following:
Protect can from weld splatter: 20 to 30 cm spraying distance.
For hollow parts and in tight spaces thoroughly ventilate after spraying; only then begin the welding process.
Only for use before welding and with sufficient ventilation.
Store spray cans outside the welding area. Use during the welding process is prohibited for safety reasons.

Forventet levering: 29.–30. sep.

Bestil senest onsdag kl. 23:59 · bestillingen sendes til Reca torsdag