- 2.8 mm
- 120 mm
- 96092000000
- Graphite
- 1.667 g
- 6 piece
- 6
- 0 - not applicable
- HB
Hand tools
- Screwdriver
- Wrench
- RECA combination ratchet spanner Varius, straight
- RECA combination ratchet spanner Varius, angled
- RECA Varius Plus combination ratchet spanner
- RECA Varius 11-in-1 double-ring ratchet spanner
- RECA double ring ratchet spanner Varius Quattro
- RECA Varius 11-in-1 double-end ratchet spanner inserts
- RECA Varius ratchet spanner set, straight
- RECA Varius ratchet spanner set, reversible
- RECA Varius Plus ratchet spanner set
- Scaffolding ratchet tool 19x22
- RECA double-end socket wrench
- RECA double-end socket wrench set
- RECA 2C adjustable wrench
- RECA 2C adjustable wrench, large span width
- RECA combination wrench, angled
- RECA double open-end wrench
- RECA double-end box wrench depressed centre
- RECA combination wrench XL angled, long version
- RECA combination wrench sets angled
- RECA double open-end wrench sets
- RECA double-end box wrench sets depressed centre
- RECA combination wrench set XL, long version
- RECA tool roll, empty
- RECA plastic holder for combination wrench
- RECA plastic holder for double open-end wrench
- Universal site wrench
- RECA universal key UNI-KEY
- RECA universal key X-Key
- RECA double box-end wrench DIN 3118, open
- Universal Twin Key
- Ratchets & socket wrenches
- 1/4 inch
- Socket wrench sets
- Ratchets
- Socket wrench inserts
- RECA 1/4 in socket wrench terminal block
- RECA 1/4 in socket wrench inserts, long version, metric
- RECA POWER SYSTEM 4-in-1 1/4 inch
- RECA 1/4" socket wrench inserts, metric
- RECA screwdriver bits, 1/4" hexagon socket
- RECA screwdriver bits, 1/4" Phillips
- RECA screwdriver bits, 1/4" Pozidriv
- RECA screwdriver bits, 1/4" TX
- Accessories
- Impact socket wrench inserts
- 3/8 inch
- 1/2 inch
- Socket wrench sets
- Ratchets
- Socket wrench inserts
- RECA POWER SYSTEM 2-in-1 1/4 inch
- RECA twist impact socket 1/2 box 14 pieces
- RECA sockets 1/2 inch, short version, metric
- RECA sockets 1/2 inch, long version, metric
- RECA hexagon socket sets 1/2 inch short version
- RECA sockets 1/2 inch HEX long version
- RECA sockets 1/2 inch TX short version
- RECA sockets 1/2 inch TX, long version
- RECA hexagon socket/TX socket wrench sets
- RECA 1/2" socket wrench clamping strip
- Accessories
- Impact socket wrench & accessories
- 1/4 inch
- T-handle wrench
- RECA MagicRing long L-shaped hex key
- RECA L-shaped hex key DIN 911/ISO 2936 - hexagon
- RECA L-shaped hex key, long, DIN 911/ISO 2936 - hexagon
- RECA L-shaped hex key, long - hexagon on one end, ball head
- RECA L-shaped TX key
- RECA long L-shaped TX key
- 2C T-handle hex key - hexagon socket HEX
- 2C T-handle TX key
- 2C T-handle socket wrench
- 2C T-handle wrench sets
- RECA COMPACT L-shaped hex key set ball head MagicRing
- RECA COMPACT L-shaped hex key set
- RECA COMPACT L-shaped TX key set
- RECA L-shaped hex key set MagicRing - hexagon/ball head
- RECA IMPACT L-shaped hex key set
- RECA IMPACT L-shaped hex key set - hexagon/ball head
- RECA IMPACT L-shaped TX key set
- RECA L-shaped TX key set - long version
- RECA L-shaped hex key set in sliding box - hexagonal
- RECA L-shaped hex key set on ring - hexagonal
- RECA hex key Hex-Plus with holding function HF
- RECA L-shaped hex key set Hex-Plus HF multicolour
- RECA L-shaped hex key set INOX Hex-Plus multicolour
- Bits
- Bit sets
- RECA impact bit set MIDI PH/TX 10 pieces
- RECA impact bit set MIDI PZ/TX 10 pieces
- RECA impact bit set MAXI PZ/PH/TX/HEX 30 pieces
- RECA impact bit set 50 mm, PZ/PH/TX, 6 pieces
- RECA bit set Inox TX
- RECA bit set Inox TX+PZ+PH
- RECA ALL-IN-ONE bit nut setter set
- RECA bit bag universal 55 pieces
- RECA bit set TXW+PZ 10 pieces
- RECA TX bit set, 10 pieces
- RECA bit set universal 10 pieces
- RECA bit set TX+PZ+PH, 10 pieces
- RECA bit set H-P-E 10 pieces, heating, plumbing, electrical
- RECA bit set universal, 31 pieces
- RECA bit set TX+PZ+PH, 31 pieces
- RECA TX bit set, 31 pieces
- RECA dry walling bit set PH, 10 pcs.
- RECA bit set TX+PZ+PH torsion, 31 pieces
- RECA bit set TX torsion, 31 pieces
- TX bits
- Pozidriv bits
- Phillips bits
- PlusMinus bits
- Reamer
- Hexagon socket bits
- Slotted bits
- Square drive bits
- Bit holder
- RECA bit holder 1/4 inch - system E 6.3
- Bit holder - FEIN system
- Angled driver attachment 1/4 inch, E6.3
- RECA Bit-Click 1/4 inch - system E 6.3
- RECA magnetic bit holder BiG 1/4 inch - system E 6.3
- Universal holder with quick-change chuck
- RECA INOX bit holder 1/4 inch - system E 6.3
- RECA impact bit holder 1/4 inch
- Square adapter set
- Tool shank connector 1/4 inch
- 1/4-inch connector with quick-change chuck
- RECA dry walling bit holder 1/4 inch
- RECA bit holder MAG BiT 1/4 inch
- Bit mount with SDS drive arbor
- Bit screwdriver/bit ratchet tool
- Hexagon nut
- Bit sets
- Torque tool
- RECA torque wrench turning knob reversible ratchet head
- RECA torque wrench with plug-in tool mount
- Plug-in open-end wrench 9 Ã 12 mm
- Plug-in open-end wrench 14 Ã 18 mm
- Plug-in box-end wrench 9 Ã 12 mm
- Plug-in box-end wrench 14 Ã 18 mm
- Plug-in reversible ratchet
- Plug-in welding piece
- Rotary square box wrench
- Pliers, sheath stripping and wiring tools
- Combination pliers DIN 5244
- Side cutters
- Snipe-nose pliers
- RECA 2C snipe-nose pliers, straight
- RECA 2C snipe-nose pliers, straight VDE
- RECA snipe-nose pliers, dip-insulated, straight
- RECA 2C snipe-nose pliers, bent 40°
- RECA 2C snipe-nose pliers, bent 40° VDE
- RECA snipe-nose pliers, dip-insulated, bent 40°
- RECA 2C radio pliers, straight
- RECA radio pliers, dip-insulated, straight
- RECA telephone pliers straight ECO
- Flat-nose pliers
- Round-nose pliers
- Cable cutters
- Wire stripping pliers and stripping tools
- Circlip pliers
- Pincers
- Bolt cutters
- Water pump pliers
- Pipe wrenches
- Locking pliers
- Slip joint pliers
- Universal pliers
- Trapezoidal punch pliers
- Crimping tools and wire crimpers
- Crimping tools for wire end ferrules
- Crimping tool for wire end ferrules 0.25â6 mm², 250 mm
- VDE crimping tool, wire end ferrules 0.25-2.5 mm², 145 mm
- Crimping tool for wire end ferrules 250 mm
- Crimping tool for wire end ferrules Preci Force 220 mm
- Self-adjusting crimping tool, wire end ferrules, square crimping 180 mm
- Self-adjusting crimping tool, wire end ferrules, front insert 190 mm
- Self-adjusting crimping tool, wire end ferrules, hex. crimping 180mm
- Crimping tools for cable lugs and connectors
- Multi crimping tool with replaceable magazine
- Wire crimpers
- Crimping tools for wire end ferrules
- Plier sets
- Punch pliers
- Ear clamp pliers
- Electronics pliers
- Plumber's wrenches
- Cable cutters
- Hammers
- Machinist's hammer
- Mallet
- Soft-face hammer
- Sledgehammer
- Wood hammer
- Combination hammer
- Simplex hammer
- Spare parts for hammer
- Ash handles for machinist's hammer
- Hickory handles f. machinist's hammer
- Ash handles for sledgehammers
- Ash handles for mallets
- Tapered sleeves
- Replacement heads f. soft-face hammer
- Replacement heads for ultra machinist's hammer
- Simplex hammer inserts, rubber composition
- Simplex hammer inserts, super plastic
- Simplex hammer inserts, TPE-soft
- Simplex hammer inserts, TPE-mid
- Roofer's hammer
- Plasterer's hatchet
- Brick hammer
- Rubber mallet
- Hand saws
- Striking tool
- RECA pin punch octagonal DIN 6450
- RECA drift punch octagonal DIN 6458
- RECA centre punch octagonal DIN 7250
- RECA flat chisel flat oval DIN 6453
- RECA cross-cut chisel flat oval DIN 6451
- RECA stone chisel octagonal DIN 7254 B
- RECA point chisel octagonal DIN 7256
- RECA slot chisel flat oval
- RECA electrician's chisel octagonal
- Hand protection for universal chisel
- Hand protection for slitting chisel
- Automatic impact punch
- Replacement tips
- RECA striking tool set box 15 pieces
- RECA striking tool set box 6 pieces
- RECA drift punch set box 6 pieces
- RECA pin punch set box 6 pieces
- Number sets DIN 1451
- Letter sets DIN 1451
- Leather wad punch DIN 7200 A
- Screw extractor
- Knives & blades
- Shears
- Files
- Engineer's files, flat DIN 7261 shape A
- Engineer's files, semi-circular DIN 7261 shape E
- Engineer's files, round DIN 7261 shape F
- Engineer's files, triangular DIN 7261 shape C
- Engineer's files, square DIN 7261 shape D
- Thread file - metric
- File handles, plastic
- Hardwood file handles
- Engineer's file set with file brush, 6 pieces
- Key file set, 6 pieces
- Chainsaw chain files
- Wood rasp
- Marking tools and labelling
- Mortising and extraction tools
- Cable feed systems and cable dispensers
- Deburring tool
- Pipe and hose cutting tools
- RECA pipe cutter MINI 3-16 mm
- RECA pipe cutter MINI 3-25 mm
- RECA pipe cutter COMPACT copper 3-30 mm
- RECA pipe cutter COMPACT INOX 3-30 mm
- RECA pipe cutter, telescopic, copper 3-35 mm
- RECA pipe cutter, telescopic, Inox 3â35 mm
- RECA pipe cutter Quick INOX 6-76 mm
- RECA pipe cutter Quick plastic 6-76 mm
- RECA pipe cutter Quick, plastic 50-127 mm
- RECA pipe cutter Quick, plastic 100-170 mm
- RECA steel pipe cutters 1/8-2 inch
- Replacement cutting wheels
- Replacement pivot pins
- RECA hose & plastic pipe shears 28 mm
- RECA spare parts for composite pipe shears 26 mm
- RECA spare blade for hose and plastic pipe shears
- RECA hose & plastic pipe shears 22 mm
- Plastic pipe shears
- Replacement blade
- RECA plastic pipe shears
- RECA replacement blade for plastic pipe shears
- RECA composite pipe shears 26 mm
- Bevelled-edge chisel
- Tackers & staples
- Rapid hammer tacker R19 (type 13)
- Rapid tacker R 23 (type 13)
- Rapid tacker R 33 (type 13)
- Rapid fine wire staple, type 13
- Rapid tacker R 53 (type 53)
- Rapid fine wire staple, type 53
- Rapid tacker R 34 (type 140)
- Rapid hammer tacker R 311 (type 140)
- Rapid double driver for hammer tacker R 311
- Rapid holster for hammer tacker R 311
- Rapid flat-wire staple, type 140
- Application guns
- Screwdriver
Skil eftir
Width across flats
Width across flats
Material
Material
Head diameter
Head diameter
Harmonized System Code
Harmonized System Code
Suitable for screw
Suitable for screw
Height
Height
Diameter
Diameter
Length
Length
Colour
Colour
Number of segments
Number of segments
Hammer weight
Hammer weight
Slot length
Slot length
Width of jaws (outside)
Width of jaws (outside)
Min. width across flats
Min. width across flats
Max. width across flats
Max. width across flats
Max. clamping width
Max. clamping width
External dimension of wrench head 2
External dimension of wrench head 2
External dimension of wrench head
External dimension of wrench head
Ring height 2
Ring height 2
External diameter of ring 2
External diameter of ring 2
Depth
Depth
Weld measure
Weld measure
Max. hard wire diameter cutting capacity
Max. hard wire diameter cutting capacity
Max. cable diameter
Max. cable diameter
Suitable for min. shafts
Suitable for min. shafts
Min. hole diameter
Min. hole diameter
Max. hole diameter
Max. hole diameter
Suitable for hammer weight
Suitable for hammer weight
Width of cutting edge
Width of cutting edge
Thickness of blade
Thickness of blade
Diameter of hole
Diameter of hole
Drive type
Drive type
Hand tools
Vísir 1-12 of 1460 vøru(r)
Active filters
- 2.8 mm
- 120 mm
- 96092000000
- White
- 1.667 g
- 6 piece
- 6
- 0 - not applicable
- 0 - not applicable
- Powerjet-Li 380 battery-powered press; charger, Li-Ion recha
- 1560 g
- 7.2 V
- 1.3 Ah
- 1 h
- 1
- 0 - not applicable
- Li-lon
- 5 PCS
- Koaxial (1:10) + 380 ml
- Koaxial (1:10) + 420 ml
- Koaxial (1:10) + 410 ml
RECA dry marker set 2-in-1
0695900283
- 96084000000
- 15 mm
- 43 g
- 1 x 2-in-1 dry marker with graphite lead, 6 x graphite lead
- 152 mm
- 6 mm
- 1
- 0 - not applicable
- 2.8 mm
RECA dry marker 2-in-1
0695900282
- 96084000000
- 15 mm
- 22 g
- 152 mm
- 6 mm
- 1
- 0 - not applicable
- 2.8 mm
Spare blades S 10, for deburring tool
0694701098
N 80 spare blades
0694701104
Liza-Burr deburring tool
0694701006
N 3 spare blades
0694701110
Replacement blades N 1, TiN-coated
0694701109
N 1 spare blades
0694701106
S 35 spare blades
0694701103