1 / 4
Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
Application area
Diagonal bracing of roof and wall structures
Description
1.5 mm 1.5 mm wind brace band is used for diagonal bracing of roof and wall constructions.
Advantages
- CE marking in line with EN 14545
- 25 % lower weight for easier handling
- High tensile strength due to patented edge shaping and use of high-quality steels
Advice
- The 1.5 mm wind brace band can be applied directly to the rafter top. Ensure that wind and tensile forces are correctly transferred to the roof structure. The wind brace band is secured with anchor nails. At least two nails must be attached at each rafter crossing point. Edge clearances and centre to centre distances must be observed for nails. Multiple wind brace bands can be arranged side by side to distribute stronger forces. The fasteners used must comply with EN 14592.
- Suitable fasteners are:
- Anchor nails to EN 14592 (article no. 0681 040 ...)
Technical specifications
| Approval | EN 14545:2009-02 |
| Diameter of hole | 5 mm |
| Length of roll | 50 m |
| Material | Steel |
| Material designation | S350GD |
| Min. breaking elongation A80 | 16 % |
| Min. tensile strength Rm | 420 N/mm² |
| Min. yield strength (ReH) | 350 N/mm² |
| Surface | Hot dip galvanized |
| Thickness | 1.5 mm |
| Weight | 22 kg |
| Width | 40 mm |
| Width x thickness | 40 x 1.5 mm |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
Wind brace band CE, galvanised steel, packaged 40x1.5x50,000
1.5 mm 1.5 mm wind brace band is used for diagonal bracing of roof and wall constructions.
| Article number | 0681013040 |
| EAN | 4029484813674 |
| Pack unit | 1 pc |
| Approval | EN 14545:2009-02 |
| Diameter of hole | 5 mm |
| Length of roll | 50 m |
| Material | Steel |
| Material designation | S350GD |
| Supplier | RECA NORM |