Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
- Steel
- Stainless steel
- Cast iron
- Non-ferrous metal
- Universal use
Universal application in steel, cast iron, stainless steel, non-ferrous base metals and light metals.
The triple cutting edge conical and countersink deburring tool is characterised by its new machining geometry. The extra-wide clamping groove ensures faster chip and heat transfer. This greatly increases the service life of the tool. The variable relief grinding ensures the perfect countersinking surface. The Ti AlN (titanium aluminium nitride) coating further increases the countersinking surface.
Advantages
- Faster countersinking thanks to variable relief grinding that facilitates much higher feed rates
- Longer service life due to thin cutting wedge that reduces abrasive wear
- Extremely quiet running ensures an optimal, smooth countersinking result
- TiAIN coating for a longer service life, higher cutting speed and chatter-free working
- Universal use - for materials up to 1100 N/mm²
- Suitable for steel and stainless steel (blue/green colour rings)
- No movement in the drill chuck and optimal, positive-fit power transmission via TRICON shank
Advice
- Reduce the feed rate for materials that are difficult to machine, e.g. stainless steel.
Technical specifications
| Length | 63 mm |
| Shank diameter | 10 mm |
| Spot-facer diameter | 20.5 mm |
| Suitable for screw | M10 |
ultra+ conical countersink, 90°, DIN 335 HSS TiAlN, with 3 blades, 90°, 20.5 mm
The triple cutting edge conical and countersink deburring tool is characterised by its new machining geometry. The extra-wide clamping groove ensures faster chip and heat transfer. This greatly increases the service life of the tool. The variable relief grinding ensures the perfect countersinking surface. The Ti AlN (titanium aluminium nitride) coating further increases the countersinking surface.
| Article number | 0617910205 |
| EAN | 4029484914494 |
| Pack unit | 1 pc |
| Length | 63 mm |
| Shank diameter | 10 mm |
| Spot-facer diameter | 20.5 mm |
| Suitable for screw | M10 |
| Supplier | RECA NORM |