Updated product information. We are reviewing every description in the catalogue. The application area and the materials listed may be incorrect while we set the correct materials on all articles. If in doubt, ask your contact at A4.
The following versions can be used for attaching the listed elements Hook: lamps, lights, hanging baskets, ceiling decorations, hanging racks etc. Hexagon nut: stand-off installations, racks, wardrobes, lamps, ventilation, ducts, washbasins, wall-mounted WCs, urinals, suspended pipework etc. to all materials with sufficient cavity depth - refer to table for minimum cavity depths.
Advantages
- Locks automatically into the base material
- The threaded rods are adjustable, allowing gradients (piping) to be created using different lengths of thread engagement
- Immediate load-bearing capacity
Advice
- Minimum cavity depths and drill hole diameters must be observed.
- On the M10 version, a pre-mounted rubber plug fills the large drill hole.
With washer and nut
Technical specifications
| Anchor length (l) | 100 mm |
| Design | With washer and nut |
| Material | Steel |
| Min. breaking force | 6.3 kN |
| Minimum cavity depth (h) | 70 mm |
| Nominal drill hole diameter | 17 mm |
| Surface | Zinc plated |
| Thread diameter | 6.0 mm |
| Thread length (metric thread) | 100.0 mm |
| Washer diameter | 30.0 mm |
Expected delivery: 29–30 Sep
Order by Wednesday 23:59 · sent to Reca on Thursday
Toggle fixing, galv. steel, hex. nut and washer, drill hole Ø 16 mm, M6 x 100
Application: area: The following versions can be used for attaching the listed elements Hook: lamps, lights, hanging baskets, ceiling decorations, hanging racks etc. Hexagon nut: stand-off installations, racks, wardrobes, lamps, ventilation, ducts, washbasins, wall-mounted WCs, urinals, suspended pipework etc. to all materials with sufficient cavity depth - refer to table for minimum cavity depths.
| Article number | 0904506100 |
| EAN | 4029484147236 |
| Pack unit | pk (25 pcs) |
| Anchor length (l) | 100 mm |
| Design | With washer and nut |
| Material | Steel |
| Min. breaking force | 6.3 kN |
| Minimum cavity depth (h) | 70 mm |
| Supplier | RECA NORM |