Patented thread sealing threads made of 100% polytetrafluoroethelyne (PTFE) for sealing metal and plastic threads.
Replaces all other sealants
- Resistant to almost all media
- Huge time savings and cost-effective
- Forms a PTFE film of the exact thickness required when the thread is locked
- Complete chemical resistance to the most aggressive chemicals, solvents and acids
- Can be used in temperatures ranging from -200°C to +240°C
- Non-flammable and non-combustible

Application area:

- Starting at the beginning of the pipe, wrap in the direction of the thread randomly with overlapping
- Apply 2–3 drops of the lubricant (in the lower stopper of the dispenser) to the thread and spread out. The lubricant is biologically
degradable and entirely safe
- Care should be taken to use enough material, particularly at the start of the pipe
- The following manufacturer's guidelines must be observed:
1/2 inch 12 (fine thread) to 18 (coarse thread) windings
1 1/2 inch 16 (fine thread) to 24 (coarse thread) windings
For other dimensions, adjust the windings accordingly

Advantages:

Advantages of material
- Consists of 100% PTFE
- No expiry date
- Resistant to fungus, mould, bacteria, enzymatic and microbiological attacks, oxidation
- Absolutely inert, remains permanently soft and flexible

Advantages of application
- Huge time savings and cost-effective
- Can be used immediately for metal and plastic connections
- Is wrapped at random
- Installation directly from the practical dispenser with unique knife
- Replaces all other sealant

Content remark:

175 m coil

Advice:

Free from chloride, silicone, halogens, plasticisers, cadmium, synthetic oils and fats, PCB, PCP, PCT, paint-damaging wetting substances, asbestos, benzene, ions